We are excited to announce that it is now official - we are going to the MakerFaire Bay Area! Solarbotics will be in the Maker Shed May 17 & 18, 2014 with some brand new product. Come check it out if you are around.
New Product Friday: Protoboards, Mighty ...
Solar botics
June 14, 2013
We've got a pretty long lineup of new product waiting for their turn to be presented to you. First off, we are now carrying a large selection of protoboards from BusBoard, first 3 are right here, along with some other cool stuff:
|
BPS SB300 Solderable Breadboard (360 tie-points) $3.99 Want to move quickly from prototype to permanent project? Transfer your half-size breadboarded circuit to this tight pin for pin breadboard compatible protoboard to create a rugged long-lasting prototype! |
 |
BPS SB400 Solderable Breadboard (540 tie-points) $4.99 Want to move quickly from prototype to permanent project? Transfer your half-size breadboarded circuit to this complete pin for pin breadboard compatible protoboard to create a rugged long-lasting prototype! |
 |
BPS SB404 Solderable Breadboard (626 tie-points) $4.99 Want to move quickly from prototype to permanent project? Transfer your half-size breadboarded circuit to this convenient breadboard compatible protoboard (with mounting holes & silkscreening) to create a rugged long-lasting prototype! |
 |
The Mighty Mini Bundle $34.00 The Mighty Mini Bundle is basically an Arduino in its prime that has exercised... a lot! Not only is it skinny but it has the rated regulated power of 5 ordinary Arduinos (5 Amps) to back it up. |
 |
12V Dimmer Kit V2 $14.95 The 12V Dimmer Kit V2 by Dale Wheat is an efficient PWM contoller/dimmer for dimming LEDs or slowing Motors down manually up to 60W! |
And now to the braggin' time! The MakerFaire peoples decided that we demonstrated "great creativity, ingenuity ... innovation" and other general awesomeness, so we got this fancy blue Editor's Choice ribbon:
Aaaand that's it for our Friday post. Stay tuned for more next week!
MORE POSTS
Grove Smart Plant Kit Demo
Grove Plant Care Kit is a smart automated solution for making sure the plant stays alive and well. The electronics monitor 4 different parameters necessary for the plant being happy and healthy: humidity, temperature, UV levels, and soil moisture. From these variables it creates a watering schedule that will keep the plant at its optimal […]
Friday New Product: Kossel Accessories
Brainwave Pro 3-Axis CNC controller For Kossel $185.83 The Kossel Pro uses the Z-Designs Brainwave Pro controller, which is the product of a close collaboration between Terence Tam and Mike Ziomkowski, based upon Matthew Wilson's original Brainwave low cost 3D Printer controller. Kossel Ball Joint Set Kit $78.00 These are not repurposed RC Car ball […]
Zendulums for Japan - results!
We've wrapped up our "Zendulums for Japan" support drive, and we're happy to announce we've sold 84 kits for a total of $2,396.07. A donation of $2400 is being processed to Red Cross Japan. Thanks to all for assisting in our little effort to give some help!
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.