From the BEAM mailing list, we're happy to report that Tom Gray managed to win 1st at the NAIT robotics challenge in Edmonton!: "Thanks again to all who endured my wails and made helpful suggestions earlier this year when I couldn't get my BS2 brained Sumovore to run. " "Grant M. of Solarbotics finally traced […]
New Product Friday: Protoboards, Mighty ...
Solar botics
June 14, 2013
We've got a pretty long lineup of new product waiting for their turn to be presented to you. First off, we are now carrying a large selection of protoboards from BusBoard, first 3 are right here, along with some other cool stuff:
|
BPS SB300 Solderable Breadboard (360 tie-points) $3.99 Want to move quickly from prototype to permanent project? Transfer your half-size breadboarded circuit to this tight pin for pin breadboard compatible protoboard to create a rugged long-lasting prototype! |
 |
BPS SB400 Solderable Breadboard (540 tie-points) $4.99 Want to move quickly from prototype to permanent project? Transfer your half-size breadboarded circuit to this complete pin for pin breadboard compatible protoboard to create a rugged long-lasting prototype! |
 |
BPS SB404 Solderable Breadboard (626 tie-points) $4.99 Want to move quickly from prototype to permanent project? Transfer your half-size breadboarded circuit to this convenient breadboard compatible protoboard (with mounting holes & silkscreening) to create a rugged long-lasting prototype! |
 |
The Mighty Mini Bundle $34.00 The Mighty Mini Bundle is basically an Arduino in its prime that has exercised... a lot! Not only is it skinny but it has the rated regulated power of 5 ordinary Arduinos (5 Amps) to back it up. |
 |
12V Dimmer Kit V2 $14.95 The 12V Dimmer Kit V2 by Dale Wheat is an efficient PWM contoller/dimmer for dimming LEDs or slowing Motors down manually up to 60W! |
And now to the braggin' time! The MakerFaire peoples decided that we demonstrated "great creativity, ingenuity ... innovation" and other general awesomeness, so we got this fancy blue Editor's Choice ribbon:
Aaaand that's it for our Friday post. Stay tuned for more next week!
MORE POSTS
Solarbotics at MakerShed
Yeah, you got it: at the Bay Area Maker Faire, on May 17 and 18, 2014. With some exciting new stuff. It requires sun, balls and mice. And no, it is not a solar-powered feline. It is much better. (Note: mice mention was only for confusion purposes, I confess). In any case, whatever it is, […]
Friday New Product: Metric Hardware
It's another Friday and we are back with the product that makes sense - it is metric! It is not measured in twips, poppyseeds, barleycorns, yards, furlongs, or any of this funny stuff. It's your good old straightforward decimals. Metric 2.5mm Hex Nut - 25 Pack $4.00 Metric M2.5 Hex Nut, in packs of 25, […]
Solarcell Comparison Datasheet
Hi all! We've distilled this year's solar cell summer-solstice tests into a nice, pretty set of PDF files. Want to know the power curves of our solarcells? Check it out here!
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.