For far too long we've toiled under the merciless grip of the Gear Motor. But no more! For behold, there appears a trio of defiant servos to overthrow the tyrannical rule! *cough* But seriously forks, we have three new units available from Grand-Wing Servo. The 22140 GWS Modified Servo is a useful continuous rotation, full-sized unit. […]
New Product Friday: Protoboards, Mighty ...
Solar botics
June 14, 2013
We've got a pretty long lineup of new product waiting for their turn to be presented to you. First off, we are now carrying a large selection of protoboards from BusBoard, first 3 are right here, along with some other cool stuff:
|
BPS SB300 Solderable Breadboard (360 tie-points) $3.99 Want to move quickly from prototype to permanent project? Transfer your half-size breadboarded circuit to this tight pin for pin breadboard compatible protoboard to create a rugged long-lasting prototype! |
 |
BPS SB400 Solderable Breadboard (540 tie-points) $4.99 Want to move quickly from prototype to permanent project? Transfer your half-size breadboarded circuit to this complete pin for pin breadboard compatible protoboard to create a rugged long-lasting prototype! |
 |
BPS SB404 Solderable Breadboard (626 tie-points) $4.99 Want to move quickly from prototype to permanent project? Transfer your half-size breadboarded circuit to this convenient breadboard compatible protoboard (with mounting holes & silkscreening) to create a rugged long-lasting prototype! |
 |
The Mighty Mini Bundle $34.00 The Mighty Mini Bundle is basically an Arduino in its prime that has exercised... a lot! Not only is it skinny but it has the rated regulated power of 5 ordinary Arduinos (5 Amps) to back it up. |
 |
12V Dimmer Kit V2 $14.95 The 12V Dimmer Kit V2 by Dale Wheat is an efficient PWM contoller/dimmer for dimming LEDs or slowing Motors down manually up to 60W! |
And now to the braggin' time! The MakerFaire peoples decided that we demonstrated "great creativity, ingenuity ... innovation" and other general awesomeness, so we got this fancy blue Editor's Choice ribbon:
Aaaand that's it for our Friday post. Stay tuned for more next week!
MORE POSTS
Aleph Objects (Lulzbot) is still alive! ...
Update: Additional information from the Loveland Reporter Herald We've been big fans of Aleph Objects' 3D printers. They fit that sorta "Prosumer" niche. A bit better than kit-builds, not quite as expensive as the big professional units. We were disappointed we got the call a few months ago relating that Aleph was looking to shut […]
Friday New Product: BusBoard Protoboards
Wee, more protoboards! Now this is the last batch, we don't got no more. Next time it will be something else, I promise. PadBoard-1 Pad-per-Hole, 80x50mm Solder Protoboard $3.75 A tight and tidy one-pad-per-hole, plated-through, double-sided board. Ideal for wildly-wired, small projects! PadBoard-2, Pad-Per-Hole, 80x100mm Solder Protoboard $6.82 For the ultimate in protoboard flexibility, here's […]
Solarbotics at Calgary Entertainment Exp...
Yes! We are quite busy preparing to the above said Entertainment Expo, that is going to take place on April 24-27 2014. Come by our booth(s), which are # 302 and 402, we are going to have lots of new exciting demos to show off. A few preview […]
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.