This circuit is used to create a simple "edgebot" sumo robot. Being an edgebot refers that it will repeat the same backup/turn/go forward action when it's single edge sensor detects the edge of the ring. This version of the circuit is quite simple, and always turns the same way.
New Product Friday: Protoboards, Mighty ...
Solar botics
June 14, 2013
We've got a pretty long lineup of new product waiting for their turn to be presented to you. First off, we are now carrying a large selection of protoboards from BusBoard, first 3 are right here, along with some other cool stuff:
|
BPS SB300 Solderable Breadboard (360 tie-points) $3.99 Want to move quickly from prototype to permanent project? Transfer your half-size breadboarded circuit to this tight pin for pin breadboard compatible protoboard to create a rugged long-lasting prototype! |
 |
BPS SB400 Solderable Breadboard (540 tie-points) $4.99 Want to move quickly from prototype to permanent project? Transfer your half-size breadboarded circuit to this complete pin for pin breadboard compatible protoboard to create a rugged long-lasting prototype! |
 |
BPS SB404 Solderable Breadboard (626 tie-points) $4.99 Want to move quickly from prototype to permanent project? Transfer your half-size breadboarded circuit to this convenient breadboard compatible protoboard (with mounting holes & silkscreening) to create a rugged long-lasting prototype! |
 |
The Mighty Mini Bundle $34.00 The Mighty Mini Bundle is basically an Arduino in its prime that has exercised... a lot! Not only is it skinny but it has the rated regulated power of 5 ordinary Arduinos (5 Amps) to back it up. |
 |
12V Dimmer Kit V2 $14.95 The 12V Dimmer Kit V2 by Dale Wheat is an efficient PWM contoller/dimmer for dimming LEDs or slowing Motors down manually up to 60W! |
And now to the braggin' time! The MakerFaire peoples decided that we demonstrated "great creativity, ingenuity ... innovation" and other general awesomeness, so we got this fancy blue Editor's Choice ribbon:
Aaaand that's it for our Friday post. Stay tuned for more next week!
MORE POSTS
Robots using GM15s
Sorry for the lack of posts lately. If you didn't already know, Solarbotics has been moving offices, and it's taken a surprising amount of effort to get everbody/thing moved and settled. Beyond that, I've found some time to websurf...just a bit! A GM15 linefollower? Neat!(Update!:)He's just posted a video of it going ~40cm/s (although he's […]
Arduino Book...and the Pendulum Swing!
Here's a great booklet to accompany any new Freeduino purchase - "Getting Started with Arduino", written by Massimo Banzi (the co-founder of the Arduino Project). This title is based on his free-download introduction PDF, but takes is much farther, guiding new electronics enthusiasts into how to use the Arduino / Freeduino in a project. Also […]
Wednesday Cool Links
Here we go, it’s the W day again. Seems like the previous one was two infinities ago. During that infinite time we had plenty of opportunities to pick the interesting stuff floating around internets, and bring it to you: Headphone Light Show EL (electroluminescent) wire is a cool thing. Add it to the headphones and […]
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.