Ok, more like The Northern light. There's only one, but it creates lots of light! We made the SB-Firefly as a ATtiny85-based blinky light / "chewing-gum & duct-tape problem solver", that is also Digispark compatible. We made the Star Controller 3-watt RGB LED kit as an easy way to tame bright and power-hungry LEDs. We […]
New Product Friday: Protoboards, Mighty ...
Solar botics
June 14, 2013
We've got a pretty long lineup of new product waiting for their turn to be presented to you. First off, we are now carrying a large selection of protoboards from BusBoard, first 3 are right here, along with some other cool stuff:
|
BPS SB300 Solderable Breadboard (360 tie-points) $3.99 Want to move quickly from prototype to permanent project? Transfer your half-size breadboarded circuit to this tight pin for pin breadboard compatible protoboard to create a rugged long-lasting prototype! |
 |
BPS SB400 Solderable Breadboard (540 tie-points) $4.99 Want to move quickly from prototype to permanent project? Transfer your half-size breadboarded circuit to this complete pin for pin breadboard compatible protoboard to create a rugged long-lasting prototype! |
 |
BPS SB404 Solderable Breadboard (626 tie-points) $4.99 Want to move quickly from prototype to permanent project? Transfer your half-size breadboarded circuit to this convenient breadboard compatible protoboard (with mounting holes & silkscreening) to create a rugged long-lasting prototype! |
 |
The Mighty Mini Bundle $34.00 The Mighty Mini Bundle is basically an Arduino in its prime that has exercised... a lot! Not only is it skinny but it has the rated regulated power of 5 ordinary Arduinos (5 Amps) to back it up. |
 |
12V Dimmer Kit V2 $14.95 The 12V Dimmer Kit V2 by Dale Wheat is an efficient PWM contoller/dimmer for dimming LEDs or slowing Motors down manually up to 60W! |
And now to the braggin' time! The MakerFaire peoples decided that we demonstrated "great creativity, ingenuity ... innovation" and other general awesomeness, so we got this fancy blue Editor's Choice ribbon:
Aaaand that's it for our Friday post. Stay tuned for more next week!
MORE POSTS
BEP Documentation Correction... part 2!
Thanks to an observant BEP user, a schematic inconsistancy in the IMx (Inverting Multiplexor) module was discovered, located, and eradicated. If you're interested in keeping your BEP documentation totally updated, get a fresh copy of it from here.
New Vibe Motors!
We've finally come upon a suitable replacment for the venerable, discontinued VPM vibrating pager disk motor. Ah, it was a splendid device, but it sure was easy to break those motor leads... Ah! But the new VPM2 has wires prebonded to the motor, and it's slightly smaller too! We welcome our new vibrating disk motor […]
BEP Application: Bare Bones PhotoVore
We like to have some play time at Solarbotics, and the "Bare Bones Photovore" is the results of one of these play sessions. It's a very simple (amongst the simplest, we'll hazard to say) light-seeking solar-powered robot, and find it easy to build using the Bicore Experimenter's PCB.
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.