Don't even bother reading this introduction - skip on ahead and go to the first link in the list. It'll blow your mind. Medusa -Proximity Aware Multi-Touch Tabletop This interactive surface (which is actually a version of Microsoft Surface) uses a mind-boggling 138 proximity sensors to detect people around and using the table. As far […]
New Product Friday: Cowboy Touchscreens,...
Dave Hrynkiw
July 6, 2012
It's once again Friday, and you know what that means - new stuff! And, on this particular Friday in Calgary "Cowboyland" Alberta, it's the start of the 100th Calgary Stampede. This is a pretty big deal, or so we hear, judging from the rampant "yee-haws" that are shouted into the July air with surprising frequency and enthusiasm. And that statement is not, in fact, a work of fiction.
Nonetheless, we press on with our duties to present you the latest stock that we've brought in. Chekkit oot:
|
2.8" TFT Touchscreen $40.00 Add some jazz & pizazz to your project with a colour touchscreen LCD. As a bonus, this display has a resistive touchscreen attached to it already, so you can detect finger presses anywhere on the screen! Interface this LCD to just about any microcontroller with 12 I/O available. |
 |
2.8" TFT Touchscreen Shield $59.00 Spice up your Arduino project with a beautiful large touchscreen display shield with built in microSD card connection. As a bonus, this display has a resistive touchscreen attached to it, so you can detect finger presses anywhere on the screen! |
 |
Polymer Lithium Ion Battery - 500mAh 7.4v $4.95 This LiPo is a hardy little battery pack. Kingmax managed to pack a constant discharge rate of 25C into this battery. This is an excellent choice for small projects that don't need a lot of voltage but need a burst of current. |
 |
Polymer Lithium Ion Battery - 1000mAh 7.4v $6.95 This high discharge LiPo is a great way to power any R/C, robotic, or portable project. This is an excellent choice for anything that requires a small battery with a lot of punch. |
 |
USB to Micro USB cable $4.95 So the trend seems to be going the way of the USB-micro connector these days. Use this cable to interface to products such as the Arduino Leonardo, Netduino & Raspberry Pi boards, as well as many common cell phones. |
 |
USB A-A extension (6 Feet) $3.95 Need your USB cable to go that last few feet, this 6 foot extension cable lets you expand the reach of your USB devices! |
If you're in/around Calgary and don't even own a cowboy hat, it's still quite easy to get into the spirit this wonderful cowboy-a-thon. Two words: Stampede breakfast(s). Awwwww yeah. Er, I mean 'yee-haw'. Yeah, that's better.
MORE POSTS
ScoutWalker III - limited stock!
We've managed to dig up enough parts to get six ScoutWalker III's together in time for Christmas. We'll have them ready by the end of the week for shipping, so if you don't mind waiting for your order to go until then, feel free to pre-order now!
Its a boy!
Congratulations go out to Dave and Cheryl for the birth of their new baby, Dason. Dason was born September 11, 2002 at 4:16 AM weighing in at 9 pounds 14 ounces.
New Product: Metric Hardware
M3x10mm Allen Hex Socket Head Cap Black Steel Screw, 10 pcs 1.90 M3x10mm Allen Hex Socket Head Cap Black Steel Screw, 10 pcs M1.7x4mm 304 Stainless Steel Cross countersunk head Machine Screw $1.95 M1.7x4mm 304 Stainless Steel Philips head countersunk machine screws, qty 10 M3x3mm Hex Socket Head Set Screws Cup Point (grub) $1.95 Don't […]
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.