Примечание переводчика: первый раз перевел - не поняли, второй раз перевел - не поняли, третий раз перевел - аж сам понял! (что электроника это круто), а они все нет... If you can't read the above sentence, don't worry - you can rest assured that your browser has not all of the sudden switched to Russian-o-vision. […]
New Product Friday: Cowboy Touchscreens,...
Dave Hrynkiw
July 6, 2012
It's once again Friday, and you know what that means - new stuff! And, on this particular Friday in Calgary "Cowboyland" Alberta, it's the start of the 100th Calgary Stampede. This is a pretty big deal, or so we hear, judging from the rampant "yee-haws" that are shouted into the July air with surprising frequency and enthusiasm. And that statement is not, in fact, a work of fiction.
Nonetheless, we press on with our duties to present you the latest stock that we've brought in. Chekkit oot:
|
2.8" TFT Touchscreen $40.00 Add some jazz & pizazz to your project with a colour touchscreen LCD. As a bonus, this display has a resistive touchscreen attached to it already, so you can detect finger presses anywhere on the screen! Interface this LCD to just about any microcontroller with 12 I/O available. |
 |
2.8" TFT Touchscreen Shield $59.00 Spice up your Arduino project with a beautiful large touchscreen display shield with built in microSD card connection. As a bonus, this display has a resistive touchscreen attached to it, so you can detect finger presses anywhere on the screen! |
 |
Polymer Lithium Ion Battery - 500mAh 7.4v $4.95 This LiPo is a hardy little battery pack. Kingmax managed to pack a constant discharge rate of 25C into this battery. This is an excellent choice for small projects that don't need a lot of voltage but need a burst of current. |
 |
Polymer Lithium Ion Battery - 1000mAh 7.4v $6.95 This high discharge LiPo is a great way to power any R/C, robotic, or portable project. This is an excellent choice for anything that requires a small battery with a lot of punch. |
 |
USB to Micro USB cable $4.95 So the trend seems to be going the way of the USB-micro connector these days. Use this cable to interface to products such as the Arduino Leonardo, Netduino & Raspberry Pi boards, as well as many common cell phones. |
 |
USB A-A extension (6 Feet) $3.95 Need your USB cable to go that last few feet, this 6 foot extension cable lets you expand the reach of your USB devices! |
If you're in/around Calgary and don't even own a cowboy hat, it's still quite easy to get into the spirit this wonderful cowboy-a-thon. Two words: Stampede breakfast(s). Awwwww yeah. Er, I mean 'yee-haw'. Yeah, that's better.
MORE POSTS
MAKE Magazine, Vol6...
Is on robots! Lots of BEAM Robots! Read More...
Fireflies, Bundles, and Motors
Technically, winter starts with the Winter Solstice that occurs on December 21st. But we're pretty sure that whoever decided that is wrong, because it's starting to feel pretty darn cold out there. And to keep things warm, what do you need? Movement. And how do you make movement? Motors. So today we have range of […]
Sumovore Captures 1st at NAIT
From the BEAM mailing list, we're happy to report that Tom Gray managed to win 1st at the NAIT robotics challenge in Edmonton!: "Thanks again to all who endured my wails and made helpful suggestions earlier this year when I couldn't get my BS2 brained Sumovore to run. " "Grant M. of Solarbotics finally traced […]
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.