It's pretty amazing to see the adoption rate of 3D printers in the last few years, and the kind of creativity they bring out in people. I've seen quite a few variations, particularly while walking through the 3D printer villages at the MakerFaires I've already attended (either as a vendor or just a visitor), but […]
New Product Friday: Cowboy Touchscreens,...
Dave Hrynkiw
July 6, 2012
It's once again Friday, and you know what that means - new stuff! And, on this particular Friday in Calgary "Cowboyland" Alberta, it's the start of the 100th Calgary Stampede. This is a pretty big deal, or so we hear, judging from the rampant "yee-haws" that are shouted into the July air with surprising frequency and enthusiasm. And that statement is not, in fact, a work of fiction.
Nonetheless, we press on with our duties to present you the latest stock that we've brought in. Chekkit oot:
|
2.8" TFT Touchscreen $40.00 Add some jazz & pizazz to your project with a colour touchscreen LCD. As a bonus, this display has a resistive touchscreen attached to it already, so you can detect finger presses anywhere on the screen! Interface this LCD to just about any microcontroller with 12 I/O available. |
 |
2.8" TFT Touchscreen Shield $59.00 Spice up your Arduino project with a beautiful large touchscreen display shield with built in microSD card connection. As a bonus, this display has a resistive touchscreen attached to it, so you can detect finger presses anywhere on the screen! |
 |
Polymer Lithium Ion Battery - 500mAh 7.4v $4.95 This LiPo is a hardy little battery pack. Kingmax managed to pack a constant discharge rate of 25C into this battery. This is an excellent choice for small projects that don't need a lot of voltage but need a burst of current. |
 |
Polymer Lithium Ion Battery - 1000mAh 7.4v $6.95 This high discharge LiPo is a great way to power any R/C, robotic, or portable project. This is an excellent choice for anything that requires a small battery with a lot of punch. |
 |
USB to Micro USB cable $4.95 So the trend seems to be going the way of the USB-micro connector these days. Use this cable to interface to products such as the Arduino Leonardo, Netduino & Raspberry Pi boards, as well as many common cell phones. |
 |
USB A-A extension (6 Feet) $3.95 Need your USB cable to go that last few feet, this 6 foot extension cable lets you expand the reach of your USB devices! |
If you're in/around Calgary and don't even own a cowboy hat, it's still quite easy to get into the spirit this wonderful cowboy-a-thon. Two words: Stampede breakfast(s). Awwwww yeah. Er, I mean 'yee-haw'. Yeah, that's better.
MORE POSTS
Canadian Thanksgiving Holiday, 2004
A note to our customers that the Solarbotics staff will be busy feasting and visiting with family for Canada's Thanksgiving Holiday on Monday, October 11. Any orders received between Saturday and Monday will be processed on Tuesday, October 12.
GM10's not here yet!
We fully expected that the boat would beat your copy of "Nuts and Volts". Apparently it hasn't! Our GM10's are due this Thursday (the 6th of November), so stay tuned for the official release then. No, we don't have pricing yet - it depends on what our total shipping cost comes out to be. Stay […]
Escaps back in stock!
Well, the last batch of Escap gearmotors went very fast. Let's hope this batch lasts a bit longer! Unlike the last set, this set has a higher reduction ratio of 663:1 instead of 362:1. This means it starts turning 0.46V (!) drawing only 3.3mA (!!) It's a 3V rated motor, but our tests show that […]
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.