Solarbotics / HVWTech will be on "maintenance mode" while the bulk of the staff go down to the MAKE Faire in San Mateo, California. The remaining staff have begged for some relief to make the week go easier, so we are not going to be doing any UPS shipments until Monday, May 21. And don't […]
New Product Friday: Cowboy Touchscreens,...
Dave Hrynkiw
July 6, 2012
It's once again Friday, and you know what that means - new stuff! And, on this particular Friday in Calgary "Cowboyland" Alberta, it's the start of the 100th Calgary Stampede. This is a pretty big deal, or so we hear, judging from the rampant "yee-haws" that are shouted into the July air with surprising frequency and enthusiasm. And that statement is not, in fact, a work of fiction.
Nonetheless, we press on with our duties to present you the latest stock that we've brought in. Chekkit oot:
|
2.8" TFT Touchscreen $40.00 Add some jazz & pizazz to your project with a colour touchscreen LCD. As a bonus, this display has a resistive touchscreen attached to it already, so you can detect finger presses anywhere on the screen! Interface this LCD to just about any microcontroller with 12 I/O available. |
 |
2.8" TFT Touchscreen Shield $59.00 Spice up your Arduino project with a beautiful large touchscreen display shield with built in microSD card connection. As a bonus, this display has a resistive touchscreen attached to it, so you can detect finger presses anywhere on the screen! |
 |
Polymer Lithium Ion Battery - 500mAh 7.4v $4.95 This LiPo is a hardy little battery pack. Kingmax managed to pack a constant discharge rate of 25C into this battery. This is an excellent choice for small projects that don't need a lot of voltage but need a burst of current. |
 |
Polymer Lithium Ion Battery - 1000mAh 7.4v $6.95 This high discharge LiPo is a great way to power any R/C, robotic, or portable project. This is an excellent choice for anything that requires a small battery with a lot of punch. |
 |
USB to Micro USB cable $4.95 So the trend seems to be going the way of the USB-micro connector these days. Use this cable to interface to products such as the Arduino Leonardo, Netduino & Raspberry Pi boards, as well as many common cell phones. |
 |
USB A-A extension (6 Feet) $3.95 Need your USB cable to go that last few feet, this 6 foot extension cable lets you expand the reach of your USB devices! |
If you're in/around Calgary and don't even own a cowboy hat, it's still quite easy to get into the spirit this wonderful cowboy-a-thon. Two words: Stampede breakfast(s). Awwwww yeah. Er, I mean 'yee-haw'. Yeah, that's better.
MORE POSTS
Site Down for Maintenance March 10
Our website will be down for server maintenance on Sunday March 10th, 2013 between 1.30am to 11.30am MST (3:30 and 7:00 am EDT). We apologize for the inconvenience.
GM15 Dual-Deal; Microcontrollers!
Ok, ok - we've been getting requests (no; more like demands) that we offer a bit of a deal for getting the GM15's in pairs. Alright then. How does $30USD or $40Cdn a pair strike you? Ok, now let's see some nano-sumo robots! "Wot's this? A microcontroller at Solarbotics??" Yup. The Atmel ATMega8L is part […]
Basic Stamp 2 Sumovore code
For those of you with the Basic Stamp 2 addition* to the Sumovore here is some Code to get you started. You will need to download the Editor from Parallax to load and edit the code. *The BS2 add on board will be up for sale very soon
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.