Ok, more like The Northern light. There's only one, but it creates lots of light! We made the SB-Firefly as a ATtiny85-based blinky light / "chewing-gum & duct-tape problem solver", that is also Digispark compatible. We made the Star Controller 3-watt RGB LED kit as an easy way to tame bright and power-hungry LEDs. We […]
New Products: EggBot Pro, Batteries, Ras...
Solar botics
April 2, 2015
We are closed tomorrow April 3 for Good Friday, so we are bringing you the new product reveal early:
Today we are happy to announce the addition to the EggBot family - the fully assembled Egg-Bot PRO! We have a few other odds and ends worth checking out, so have a look. There is Pololu Gyro, a couple of e-textile batteries and a handy Raspberry Pi SAFE that we designed to fit the Pi V2 and B+ models.
|
Evil Mad Science EggBot Pro $390.00 Compact and easy to use with a variety of spherical and egg-shaped objects. |
 |
Pololu MinIMU-9 Gyro, Accelerometer, and Compass $23.94 You want to know where you are in space? The Pololu MinIMU-9 does it all - an L3G4200D 3-axis gyro and an LSM303DLM 3-axis accelerometer and 3-axis magnetometer onto a tiny 0.9″ × 0.6″ board. |
 |
3.7V 110mAh LiPoly battery for E-Textiles $8.34 What makes this battery special for E-textiles? Built-in current limiting for safety. |
 |
Lithium Ion (LiPoly) Battery - 110mAh 3.7V $8.34 Lithium polymer battery, but darn small! |
 |
Raspberry Pi S.A.F.E. (for B+ and V2) $7.50 The Raspberry Pi S.A.F.E. is upgraded to accommodate the Pi V2 and B+ models. |
MORE POSTS
Holiday Shipping
Another year has snuck by, and here we are on the cusp of another winter holiday season! If you want to give a Solarbotics Kit (and we hope you do...) to somebody special this year, you should be aware of our shipping deadlines. It's not recommended to use ground shipping now (which can take up […]
Monday New Product: Enclosures, FeatherW...
Acrylic Enclosure for the 1018 Interface Kit 8/8/8 $11.50 The 3804 Enclosure is designed to protect the PhdgetInterfaceKit 8/8/8 while giving you access to all terminals and connectors through openings in the enclosure. Acrylic Enclosure for the 1014 Interface Kit 0/0/4 $11.50 Acrylic Enclosure for Phidget Interface Kit (#3802) DC Motor + Stepper FeatherWing Add-on […]
The Solarbotics DIY Island & Repair...
What's the biggest event for Solarbotics in the spring? Calgary Comic Expo on April 27-30! This year we are going to be there as part of the DIY Island (booth 110) at BMO Centre, Calgary Stampede Park. DIY Island is a booth space shared between Solarbotics, Repair Oasis, Protospace and MakerFaire Calgary. Solarbotics will be […]
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.