The whole 'duino thing is just so much to say, we've got to do it three times. Blame Jerome, our intern... We've got Freeduino version 2.2 back from the assembly line today, and all tests out beeeautifully! New features include an SMD-mounted 16MHz crystal, better power-consumption circuit routing (for battery-operated projects), and "hacking pads" for […]
New Products: EggBot Pro, Batteries, Ras...
Solar botics
April 2, 2015
We are closed tomorrow April 3 for Good Friday, so we are bringing you the new product reveal early:
Today we are happy to announce the addition to the EggBot family - the fully assembled Egg-Bot PRO! We have a few other odds and ends worth checking out, so have a look. There is Pololu Gyro, a couple of e-textile batteries and a handy Raspberry Pi SAFE that we designed to fit the Pi V2 and B+ models.
|
Evil Mad Science EggBot Pro $390.00 Compact and easy to use with a variety of spherical and egg-shaped objects. |
 |
Pololu MinIMU-9 Gyro, Accelerometer, and Compass $23.94 You want to know where you are in space? The Pololu MinIMU-9 does it all - an L3G4200D 3-axis gyro and an LSM303DLM 3-axis accelerometer and 3-axis magnetometer onto a tiny 0.9″ × 0.6″ board. |
 |
3.7V 110mAh LiPoly battery for E-Textiles $8.34 What makes this battery special for E-textiles? Built-in current limiting for safety. |
 |
Lithium Ion (LiPoly) Battery - 110mAh 3.7V $8.34 Lithium polymer battery, but darn small! |
 |
Raspberry Pi S.A.F.E. (for B+ and V2) $7.50 The Raspberry Pi S.A.F.E. is upgraded to accommodate the Pi V2 and B+ models. |
MORE POSTS
Friday New Product: Goggles and NeoPixel...
So when we created the Arc Reactor project to show off at the Calgary Comic & Entertainment Expo, we also quickly put together our version of NeoPixel Goggles. We now carry the goggles and NeoPixels that fit them, as well as two other sizes of these amazing addressable RGB LED rings.
Friday New Product: Kossel Accessories
Brainwave Pro 3-Axis CNC controller For Kossel $185.83 The Kossel Pro uses the Z-Designs Brainwave Pro controller, which is the product of a close collaboration between Terence Tam and Mike Ziomkowski, based upon Matthew Wilson's original Brainwave low cost 3D Printer controller. Kossel Ball Joint Set Kit $78.00 These are not repurposed RC Car ball […]
Mark Lecturing in Maryland, not Texas!
Whups! Sorry, we got a fact wrong listing Mark's lecture at the Goddard Space Flight Center. It's not in Houston, Texas - it's in Greenbelt, Maryland (March 23). Our apologies to Goddard Space Flight Center - I'm sure they weren't looking forward to a 1400 mile moveÂ…
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.