Ah, another new solar cell! See? There is a solar aspect to Solarbotics! Come check out the SCC3766 - it's a powerhouse!
New Products: EggBot Pro, Batteries, Ras...
Solar botics
April 2, 2015
We are closed tomorrow April 3 for Good Friday, so we are bringing you the new product reveal early:
Today we are happy to announce the addition to the EggBot family - the fully assembled Egg-Bot PRO! We have a few other odds and ends worth checking out, so have a look. There is Pololu Gyro, a couple of e-textile batteries and a handy Raspberry Pi SAFE that we designed to fit the Pi V2 and B+ models.
|
Evil Mad Science EggBot Pro $390.00 Compact and easy to use with a variety of spherical and egg-shaped objects. |
 |
Pololu MinIMU-9 Gyro, Accelerometer, and Compass $23.94 You want to know where you are in space? The Pololu MinIMU-9 does it all - an L3G4200D 3-axis gyro and an LSM303DLM 3-axis accelerometer and 3-axis magnetometer onto a tiny 0.9″ × 0.6″ board. |
 |
3.7V 110mAh LiPoly battery for E-Textiles $8.34 What makes this battery special for E-textiles? Built-in current limiting for safety. |
 |
Lithium Ion (LiPoly) Battery - 110mAh 3.7V $8.34 Lithium polymer battery, but darn small! |
 |
Raspberry Pi S.A.F.E. (for B+ and V2) $7.50 The Raspberry Pi S.A.F.E. is upgraded to accommodate the Pi V2 and B+ models. |
MORE POSTS
New Items!
Besides introducing a whole new batch of Push-Pogopins (and their measurements) into the 'misc' category, we've just introduced our 'D2' Germanium Diode. This diode is pretty good - better than the 1N270 and 1N34 types, with a voltage dropout of only 0.36V at 50mA! We're not exactly sure what type it is, but since we […]
Wheee! They're here - the new RW2!
We've just got in our newly-machined RW2 hubs & tires - and they're better! Instead of the old 1/8" axle hole that didn't quite fit the GM11a-14a series correctly (they were too loose), these new ones fit perfectly with their 3mm hole!
New TINY Pogo Pin Probes
We had some requests for some really, really small Pogo Push Pin Probes (Hmmm...shoulda named them PPPPs...). Anyway, here's the PP8s and the PPH2, which are the "short" version of the PP8 and the necessary holder to mount them. If you have really tight spaces you need to test, these are the probes you'll need!
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.