Weeee, its Wednesday again. And that means time to stare at internet more! While in other parts of the world (or so we are told) things are growing, springing and budding, here we are, with overcast greyness and last year's stuff (grass - as a best case scenario) poking from underneath the dirty snow. So […]
New Products: EggBot Pro, Batteries, Ras...
Solar botics
April 2, 2015
We are closed tomorrow April 3 for Good Friday, so we are bringing you the new product reveal early:
Today we are happy to announce the addition to the EggBot family - the fully assembled Egg-Bot PRO! We have a few other odds and ends worth checking out, so have a look. There is Pololu Gyro, a couple of e-textile batteries and a handy Raspberry Pi SAFE that we designed to fit the Pi V2 and B+ models.
|
Evil Mad Science EggBot Pro $390.00 Compact and easy to use with a variety of spherical and egg-shaped objects. |
 |
Pololu MinIMU-9 Gyro, Accelerometer, and Compass $23.94 You want to know where you are in space? The Pololu MinIMU-9 does it all - an L3G4200D 3-axis gyro and an LSM303DLM 3-axis accelerometer and 3-axis magnetometer onto a tiny 0.9″ × 0.6″ board. |
 |
3.7V 110mAh LiPoly battery for E-Textiles $8.34 What makes this battery special for E-textiles? Built-in current limiting for safety. |
 |
Lithium Ion (LiPoly) Battery - 110mAh 3.7V $8.34 Lithium polymer battery, but darn small! |
 |
Raspberry Pi S.A.F.E. (for B+ and V2) $7.50 The Raspberry Pi S.A.F.E. is upgraded to accommodate the Pi V2 and B+ models. |
MORE POSTS
New Solar cell - SCC2433b-MSE
These SCC2433b-MSE solar cells with the Miller Engine circuit on the back make it real easy to build a pulsing power source for your projects. These cells aren't quite as powerful as the SCC3733-MSE, but they're no slouches either! Check them out below!
Our Tech doesn't stink.
We have proof. Jeremie uses up these deodorant sticks, and does stuff with them:
3D Printed Treetop Star
Initially inspired by the Moravian Star on Instructables and the fact that we now carry all kinds of 3D printing filament, we decided to make one of our own glowy holiday star. We have used this thing as source files to create a similar treetop decoration of our own. After some trial and error (due […]
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.