New Products: EggBot Pro, Batteries, Ras...

Solar botics
April 2, 2015

We are closed tomorrow April 3 for Good Friday, so we are bringing you the new product reveal early:

Today we are happy to announce the addition to the EggBot family - the fully assembled Egg-Bot PRO! We have a few other odds and ends worth checking out, so have a look. There is  Pololu Gyro, a couple of e-textile batteries and a handy Raspberry Pi SAFE that we designed to fit the Pi V2 and B+ models.

Evil Mad Science EggBot Pro
$390.00

Compact and easy to use with a variety of spherical and egg-shaped objects.
Pololu MinIMU-9 Gyro, Accelerometer, and Compass
$23.94
You want to know where you are in space? The Pololu MinIMU-9 does it all - an L3G4200D 3-axis gyro and an LSM303DLM 3-axis accelerometer and 3-axis magnetometer onto a tiny 0.9″ × 0.6″ board.
3.7V 110mAh LiPoly battery for E-Textiles
$8.34

What makes this battery special for E-textiles? Built-in current limiting for safety.
Lithium Ion (LiPoly) Battery - 110mAh 3.7V
$8.34
Lithium polymer battery, but darn small!
Raspberry Pi S.A.F.E. (for B+ and V2)
$7.50

The Raspberry Pi S.A.F.E. is upgraded to accommodate the Pi V2 and B+ models.

MORE POSTS

January 12, 2003
Cool project

Neil Sandstrom from the BEAM mailing list recently posted a notice about his "ShokHead" circuit built from our tutorial. What makes this project a bit different is that he mounted it on a VPM motor, so it's all self-contained. Here's what he says about it: Just finished!!! Check it out it is really small!! http://groups.yahoo.com/group/beam/files/Psyclesam/ […]

July 12, 2007
BEP Application: Wilf Rigter Solar Power...

The following instructions detail how to build a Solar Power Smart Head version 3. The Head will seek light and when it finds the brightest source it will go into a low current standby mode. This version also comes with an low power FLED circuit to indicate when the head is active.

March 15, 2004
New Solar Cell!

As Panasonic is no longer manufacturing their line of Sunceram solar cells, we've been on the hunt for suitable replacements. Here's our first find - the SCC3733! It's a polycrystaline cell in an epoxy casing, so it's a bit heavier, but much, much less prone to breaking or burning off of the solder-pads. It's also […]

May 6, 2007
RW2i - Internal mount, and new shaft hol...

We're still digging out the new inventory, and the next addition to the Solarbotics lineup is the RW2i, which is the same profile and rolling size as our very popular RW2, but is designed with a narrow hub.We're able to do this by moving the set-screw hole inside the hub, so to cinch the screw […]

1 11 12 13 14 15 253
Solarbotics Ltd Logo
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!

Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.

Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.

cart