We're adding more and more from our Active Tech Calgary store lineup to our website. This week, NTE's line of head-shrink tubing, and Hammond Enclosures. This reflects what we have presently on hand in the store, which we're now able to bring to you via the website! We realize that with the new dataload our […]
New Products: EggBot Pro, Batteries, Ras...
Solar botics
April 2, 2015
We are closed tomorrow April 3 for Good Friday, so we are bringing you the new product reveal early:
Today we are happy to announce the addition to the EggBot family - the fully assembled Egg-Bot PRO! We have a few other odds and ends worth checking out, so have a look. There is Pololu Gyro, a couple of e-textile batteries and a handy Raspberry Pi SAFE that we designed to fit the Pi V2 and B+ models.
|
Evil Mad Science EggBot Pro $390.00 Compact and easy to use with a variety of spherical and egg-shaped objects. |
 |
Pololu MinIMU-9 Gyro, Accelerometer, and Compass $23.94 You want to know where you are in space? The Pololu MinIMU-9 does it all - an L3G4200D 3-axis gyro and an LSM303DLM 3-axis accelerometer and 3-axis magnetometer onto a tiny 0.9″ × 0.6″ board. |
 |
3.7V 110mAh LiPoly battery for E-Textiles $8.34 What makes this battery special for E-textiles? Built-in current limiting for safety. |
 |
Lithium Ion (LiPoly) Battery - 110mAh 3.7V $8.34 Lithium polymer battery, but darn small! |
 |
Raspberry Pi S.A.F.E. (for B+ and V2) $7.50 The Raspberry Pi S.A.F.E. is upgraded to accommodate the Pi V2 and B+ models. |
MORE POSTS
Starry Night Pendant Assembly Guide
We've already blogged about the Technology Grad Dresses, which are accompanied by the Starry Night Pendant as a perfect finishing touch to complete the outfit. Since then, we've upgraded and improved the Pendant design to make it a fully documented kit, rather than just a bundle: The 2xAAA battery holder offers longer life, less cost […]
Friday New Product: Kossel Accessories
Brainwave Pro 3-Axis CNC controller For Kossel $185.83 The Kossel Pro uses the Z-Designs Brainwave Pro controller, which is the product of a close collaboration between Terence Tam and Mike Ziomkowski, based upon Matthew Wilson's original Brainwave low cost 3D Printer controller. Kossel Ball Joint Set Kit $78.00 These are not repurposed RC Car ball […]
Turbot Review @ StreetTech!
Just got the word that Gareth Branwyn posted a review of our Turbot on his website at Streettech.com. Thinking of getting a Turbot? Here's a straight-shooting review! While you're there, take a look at the Solaroller article that was just posted. Neat stuff!
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.