The instructions for assembling the Pi v3 and the previous acrylic Pi SAFE are quite similar. The only difference between the models is the location of the LED light pipes, so these Pi3 instructions apply generally to all Pi SAFE versions. 1. Your Parts! 8 x 4-40 nuts 8 x 4-40 x 3/8" bolts 2 […]
New Product: Connectors
Solar botics
December 14, 2016
|
150mm Futaba-style Servo cable, Double Female $1.95 Just a standard 0.1" pitch Futaba-style servo jumper cable, with female connectors on both sides. |
 |
JST XH 2.5mm - 3 Pin plug & 100mm cable set $0.65 The JST XH 3-pin header & cable set. 100mm long, 2.5mm pin pitch. |
 |
Raspberry Pi GPIO Ribbon 40-pin Cable, 6" long $3.50 Simple 2x20 ribbon cable that breaks out the GPIO pins from the Raspberry Pi. |
 |
2-pin JST-PH Connector (2.0 mm Pitch) $0.85 The 2-pin, 2mm pitch JST connector is often seen on Lithium Polymer (LiPoly) batteries. Use this when you need the board (male) connector, or need to mate to the female connector. |
 |
3-pin JST-ZH Connector (1.5 mm Pitch) $0.59 The JST-ZH 3-pin connector is another common electronics interconnect standard. |
 |
Deans Style T Plug Male Connector $2.63 Have a Deans connector on your LiPo battery? Here's the mate! |
 |
Losi Micro-T MX2.0 2-pin connector set, wired $0.59 Losi Micro-T MX2.0 power connector set (male/female) are excellent low-profile battery connectors with 160mm (6") wires, rated 2A |
MORE POSTS
Farewell, Mr. McKee!
After 5 years of employment with Solarbotics Ltd., Grant McKee has submitted his letter of resignation to Solarbotics, effective August 16th 2005. Mr. McKee has been an invaluable resource at Solarbotics, but is off to hunker down and gather resources before making the leap to further advance his education. Although he will be greatly missed, […]
Canada Day - Closed July 1st & 2nd
This just in - our country is awesome. Now, we all know what you're thinking. "Yeah? Well my country is awesome too, and yours didn't even make it to the World Cup!" We certainly can't argue that your country is awesome as well. As for the World Cup... You wanna know what we think of […]
BEP Documentation Correction...
Just a quick note for those of you who have been trying to build the SC1 Servocores with the 0.01uF capacitors as listed in the parts list. That's an error! 0.1uF is just fine. Documentation has been revised accordingly. Sorry for the error!
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.