Jeremie, our engineer and the brains behind the SB-FireFly, can't seem to put the thing down even though it's all done and released. He's been hard at work figuring out what it's capable of, and figures that the hardware and framework could be used for a Micro-TV-B-Gone broadcaster, IR code repeater, and even a tiny […]
New Product: Connectors
Solar botics
December 14, 2016
|
150mm Futaba-style Servo cable, Double Female $1.95 Just a standard 0.1" pitch Futaba-style servo jumper cable, with female connectors on both sides. |
 |
JST XH 2.5mm - 3 Pin plug & 100mm cable set $0.65 The JST XH 3-pin header & cable set. 100mm long, 2.5mm pin pitch. |
 |
Raspberry Pi GPIO Ribbon 40-pin Cable, 6" long $3.50 Simple 2x20 ribbon cable that breaks out the GPIO pins from the Raspberry Pi. |
 |
2-pin JST-PH Connector (2.0 mm Pitch) $0.85 The 2-pin, 2mm pitch JST connector is often seen on Lithium Polymer (LiPoly) batteries. Use this when you need the board (male) connector, or need to mate to the female connector. |
 |
3-pin JST-ZH Connector (1.5 mm Pitch) $0.59 The JST-ZH 3-pin connector is another common electronics interconnect standard. |
 |
Deans Style T Plug Male Connector $2.63 Have a Deans connector on your LiPo battery? Here's the mate! |
 |
Losi Micro-T MX2.0 2-pin connector set, wired $0.59 Losi Micro-T MX2.0 power connector set (male/female) are excellent low-profile battery connectors with 160mm (6") wires, rated 2A |
MORE POSTS
Solarbotics looking for fun people
...oh, and they also should want to work with us. We have a few positions open we want to fill with people that have a good sense of humour, have some geek qualities, and can tell the difference between a diode and resistor (or sincerely want to learn!) Here are the types of people we're […]
BEPApp 3 - SPSH3
With all the interest with Wilf's "Power Smart Head", we thought it'd be an ideal project to mount on our Bicore Experimenter's PCB. To make the project work, we're even stocking the 74HC240! Check it out under the "Special Projects" link, or click here.
New: The Ardweeny BackPack!
We've been playing with the Pick and Place machine, and thought about new projects. This one, besides just being plain handy, offered us a simple project to start adding surface-mount parts to! The Ardweeny is proving to be a popular way to make a breadboard-friendly Arduino-clone, but after the prototyping is done, you still have […]
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.