Because... of things... Solarbotics didn't do a booth or official presence at this year's Bay Area MakerFaire. We opted to do something fun this time, building a custom just-for-the-fair piece of sorta-interactive LED artwork. Following on the success of the quickie LED floor mandala resting area we did at the NYC MF, we turned it […]
New Product: Connectors
Solar botics
December 14, 2016
|
150mm Futaba-style Servo cable, Double Female $1.95 Just a standard 0.1" pitch Futaba-style servo jumper cable, with female connectors on both sides. |
 |
JST XH 2.5mm - 3 Pin plug & 100mm cable set $0.65 The JST XH 3-pin header & cable set. 100mm long, 2.5mm pin pitch. |
 |
Raspberry Pi GPIO Ribbon 40-pin Cable, 6" long $3.50 Simple 2x20 ribbon cable that breaks out the GPIO pins from the Raspberry Pi. |
 |
2-pin JST-PH Connector (2.0 mm Pitch) $0.85 The 2-pin, 2mm pitch JST connector is often seen on Lithium Polymer (LiPoly) batteries. Use this when you need the board (male) connector, or need to mate to the female connector. |
 |
3-pin JST-ZH Connector (1.5 mm Pitch) $0.59 The JST-ZH 3-pin connector is another common electronics interconnect standard. |
 |
Deans Style T Plug Male Connector $2.63 Have a Deans connector on your LiPo battery? Here's the mate! |
 |
Losi Micro-T MX2.0 2-pin connector set, wired $0.59 Losi Micro-T MX2.0 power connector set (male/female) are excellent low-profile battery connectors with 160mm (6") wires, rated 2A |
MORE POSTS
Project Monday: Pingbot
Tom from our Facebook page recently showed us his latest project, the Pingbot. In Tom's words, it's "a very small (38mm diameter), usb rechargeable, programmable, musical, remote control robot designed for maximum fun and danceability." We don't know about you, but danceability should be a priority on every robot's feature list. Check out some video […]
Canadian National Exhibition and Califor...
August 14, 2000 - Canadian National Exhibition and California State Exhibition Quick news: I'm (that'd be me - Dave) off to Toronto to go attend the Canadian National Exhibition (otherwise known as "The Ex") from August 18 to September 4. In attendance will be myself (Dave Hrynkiw), Scott Martin, Mark Dalton, and to lesser degrees […]
Solarbotics at MakerFaire Bay Area
We are excited to announce that it is now official - we are going to the MakerFaire Bay Area! Solarbotics will be in the Maker Shed May 17 & 18, 2014 with some brand new product. Come check it out if you are around.
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.