For all of you holding out to get your Valentine's Day Lantern in red, the wait is over! It's now back in stock and ready to order. You can get your HexPummer Lantern right here.
New Product: Connectors
Solar botics
December 14, 2016
|
150mm Futaba-style Servo cable, Double Female $1.95 Just a standard 0.1" pitch Futaba-style servo jumper cable, with female connectors on both sides. |
 |
JST XH 2.5mm - 3 Pin plug & 100mm cable set $0.65 The JST XH 3-pin header & cable set. 100mm long, 2.5mm pin pitch. |
 |
Raspberry Pi GPIO Ribbon 40-pin Cable, 6" long $3.50 Simple 2x20 ribbon cable that breaks out the GPIO pins from the Raspberry Pi. |
 |
2-pin JST-PH Connector (2.0 mm Pitch) $0.85 The 2-pin, 2mm pitch JST connector is often seen on Lithium Polymer (LiPoly) batteries. Use this when you need the board (male) connector, or need to mate to the female connector. |
 |
3-pin JST-ZH Connector (1.5 mm Pitch) $0.59 The JST-ZH 3-pin connector is another common electronics interconnect standard. |
 |
Deans Style T Plug Male Connector $2.63 Have a Deans connector on your LiPo battery? Here's the mate! |
 |
Losi Micro-T MX2.0 2-pin connector set, wired $0.59 Losi Micro-T MX2.0 power connector set (male/female) are excellent low-profile battery connectors with 160mm (6") wires, rated 2A |
MORE POSTS
Turkey Time! (and new product too)
Woohoo! It's early October, and that means it's TURKEY TIME for us Canadians! We know, Americans have their Thanksgiving in November, but it's so cold here already that it might as well be November. So to celebrate we're releasing the following items: Make: The Fourth Year Collector's Box Set Breadboard Jumper Wire Bundle LilyPad Slide […]
Zee Ultimate Solar Mobile...
I had been giving some advice to Mark Malmberg about some art he's been putting together. Wanna see a killer huge solar-powered hanging mobile? From the builder himself: This piece has been a test piece and learning experience. I'll show it in a couple of months at a place called the Lawrence Hall of Science […]
BEP Application: Wilf Rigter Solar Power...
The following instructions detail how to build a Solar Power Smart Head version 3. The Head will seek light and when it finds the brightest source it will go into a low current standby mode. This version also comes with an low power FLED circuit to indicate when the head is active.
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.