The following instructions detail how to build a simple pummer using a BC2 (Bicore) BEP (Bicore Experimenter PCB). A pummer is a solar powered self activating LED flasher. The difference between a pummer and a BLFNAR (blinky light for no apparent reason) is that a pummer has a soft turn off, which means that it turns on fast, but slowly fades away.
New Product and Day Off
Solar botics
April 17, 2014
It's a short week this week, so new product is coming early. We are closed Friday April 18th, which is hence called Good Friday.
|
LilyPad Arduino SimpleSnap with LiPoly cell $29.95 This is the LilyPad Arduino SimpleSnap Board. It's controlled by an ATmega328 with the Arduino bootloader. It has fewer pins than the LilyPad Arduino Main Board, a built in battery, and button snap connectors! |
 |
3mm Red LED with internal resistor - 5V $0.35 A red 5 volt LED where the resistor is built right into the plastic. No more messy current limiting resistors! |
 |
5V RGB Addressable LED strip, 1M (144 per meter) $59.95 With 144 pixels per strip, this is easily the king stripxel of the techno-color jungle. |
MORE POSTS
YaaHOO! Stampede & GM11's!
Yup, it's that time of the year in Calgary, pahdnah (no, that's not an East Indian name - it's cowboy for friend). The Calgary Stampede is upon us, and we're expecting to give our staff a wee bit of leeway to enjoy themselves a bit. It shouldn't affect your service, but don't be surprised if […]
Friday New Product: Goggles and NeoPixel...
So when we created the Arc Reactor project to show off at the Calgary Comic & Entertainment Expo, we also quickly put together our version of NeoPixel Goggles. We now carry the goggles and NeoPixels that fit them, as well as two other sizes of these amazing addressable RGB LED rings.
Wednesday Links: MarshmallowMatic, Etch ...
So there's one link today that makes my artistic soul happy - it is the laser-controlled Etch A Sketch. Although I never owned an Etch A Sketch (some smarty pants might say right here that in Russia we used rusty nails to draw on cardboard instead), but the idea to draw with a laser beam […]
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.