Hi all. It's Monday, May 19th, and for some reason, we have something called "Victoria Day" today. We're not open today, but I promise, we'll be back in tomorrow, rested and relaxed and ready to process your orders! Now to just beat these darn springtime allergies...sniiiiifffff....
New Items!
Dave Hrynkiw
November 1, 2001
Besides introducing a whole new batch of Push-Pogopins (and their measurements) into the 'misc' category, we've just introduced our 'D2' Germanium Diode.
This diode is pretty good - better than the 1N270 and 1N34 types, with a voltage dropout of only 0.36V at 50mA! We're not exactly sure what type it is, but since we only have a limited quantity, I suggest you jump on these while we have them.
We also have just introduced the LMP1 and LMP2 Leg Mounting Pads. If you're familiar with our ScoutWalker kits, you'll already be familiar with the technique we use to mount the legs to the servos. We've been getting requests for these things separate from the kit, so we've brought in two styles: The "standard" LM1 regular mounting pads, and the "Heavy" LM2 style like we use in our walker kits.
They're sold in pairs, complete with the tiny screws needed to screw them to practically any servo arm.
More coming soon!
MORE POSTS
Aleph Objects (Lulzbot) is still alive! ...
Update: Additional information from the Loveland Reporter Herald We've been big fans of Aleph Objects' 3D printers. They fit that sorta "Prosumer" niche. A bit better than kit-builds, not quite as expensive as the big professional units. We were disappointed we got the call a few months ago relating that Aleph was looking to shut […]
Solarbotics at Bay Area Maker Faire ...S...
Guess what! Like every year, from May 19-20 Solarbotics is going to be at the Bay Area Maker Faire! Well, kinda. While we usually run a full booth to show off all our cool BEAM and Arduino stuff (we even ran a totally rockin' ARDX workshop last time), it unfortunately looks like costs have risen […]
Project: Experiments in Watermelon Filam...
It takes a while to get to know all the quirks of your 3D printer and filament well. We thought we'd add to the knowledge base and share what we've learned about using the eSun 1.75mm PLA filament in Glass Watermelon Red on our Kossel Pro delta style 3D printer.
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.