New Bundle: The Northern Lights!

Dave Hrynkiw
December 6, 2012

Ok, more like The Northern light. There's only one, but it creates lots of light!

We made the SB-Firefly as a ATtiny85-based blinky light / "chewing-gum & duct-tape problem solver", that is also Digispark compatible.

We made the Star Controller 3-watt RGB LED kit as an easy way to tame bright and power-hungry LEDs.

We put them together with a 3-day power supply and diffusing container, add a 10% savings, and TaDAAAH: The Northern Lights Bundle! And it's well documented too!

What do you get in the bundle?

  • 60140 SB-Firefly kit
  • 60160 Star Controller RGB 3-watt LED kit
  • 52242 2.1mm barrel jack/plug pair
  • 17020 3AA battery holder
  • 0.1µF Capacitor
  • 8025 diffusion container
  • Double-sided tape
  • 5-conductor wire

Start with our instructions to build a mobile blinky-dome of doom (mount it on your bicycle helmet - everybody will see you coming), or modify it. The SB-Firefly is programmable with the Arduino programming enviroment (with a suitable in-circuit programmer), so you can use the remaining 2 available I/O pins to blend it into your project!

MORE POSTS

May 6, 2020
Solarbotics Site Maintenance

We are expecting some outages while we perform some upgrades. Shouldn't be longer than a few hours, starting at 8pm MST May 6.

April 25, 2016
Solarbotics Raspberry Pi 3 SAFE Assembly...

The instructions for assembling the Pi v3 and the previous acrylic Pi SAFE are quite similar. The only difference between the models is the location of the LED light pipes, so these Pi3 instructions apply generally to all Pi SAFE versions. 1. Your Parts! 8 x 4-40 nuts 8 x 4-40 x 3/8" bolts 2 […]

October 17, 2008
Austin Maker Faire 2008

It's that wonderful time of year when you can see your breath in the air while you wait at the bus stop. Frost decorates the blades of grass, motorists spend five minutes scraping ice off the windshield  before departing and there are hints of snow when you look up at the hills. So what's a […]

June 25, 2014
Wednesday Links: 3D Weaving, Lasercut Go...

Another Wednesday brings another dose of links. What's new about that? Links themselves, I guess. Time-lapse Panoramas We've all seen panoramas like that - but the video at the end of the post is really worth watching (Via Geek.com) 3D Weaving Regular weaving is complex, imagine weaving in three dimensions! And the machine that does […]

1 33 34 35 36 37 253
Solarbotics Ltd Logo
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!

Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.

Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.

cart