This week: Blizzards. Ice. Snow drifts. Rather sunny and warm. Wait, what? Yup, we've seen it all this week folks. All that's left is for delicious pastries to start falling from the skies, and we can check off the last item on our home-made "meteorological phenomena" list. And boy, you have no idea how long […]
New Bundle: The Northern Lights!
Dave Hrynkiw
December 6, 2012
Ok, more like The Northern light. There's only one, but it creates lots of light!
We made the SB-Firefly as a ATtiny85-based blinky light / "chewing-gum & duct-tape problem solver", that is also Digispark compatible.
We made the Star Controller 3-watt RGB LED kit as an easy way to tame bright and power-hungry LEDs.
We put them together with a 3-day power supply and diffusing container, add a 10% savings, and TaDAAAH: The Northern Lights Bundle! And it's well documented too!
What do you get in the bundle?
- 60140 SB-Firefly kit
- 60160 Star Controller RGB 3-watt LED kit
- 52242 2.1mm barrel jack/plug pair
- 17020 3AA battery holder
- 0.1µF Capacitor
- 8025 diffusion container
- Double-sided tape
- 5-conductor wire
Start with our instructions to build a mobile blinky-dome of doom (mount it on your bicycle helmet - everybody will see you coming), or modify it. The SB-Firefly is programmable with the Arduino programming enviroment (with a suitable in-circuit programmer), so you can use the remaining 2 available I/O pins to blend it into your project!
MORE POSTS
Organizing the Advanced Section
Every once in a while we like to re-arrange the furniture. Sure, it's nice to have things look new and different, but most of the time we're just trying to make things just work better. This week we've done a little bit of restructuring of our Advanced category - we hope it'll make it easier […]
Wheee! They're here - the new RW2!
We've just got in our newly-machined RW2 hubs & tires - and they're better! Instead of the old 1/8" axle hole that didn't quite fit the GM11a-14a series correctly (they were too loose), these new ones fit perfectly with their 3mm hole!
Friday New Product: Kossel Accessories
Brainwave Pro 3-Axis CNC controller For Kossel $185.83 The Kossel Pro uses the Z-Designs Brainwave Pro controller, which is the product of a close collaboration between Terence Tam and Mike Ziomkowski, based upon Matthew Wilson's original Brainwave low cost 3D Printer controller. Kossel Ball Joint Set Kit $78.00 These are not repurposed RC Car ball […]
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.