If you're placing an order with us for a dimensionally small order and you're NOT getting the ground mail option, it's most likely due to a bug we're trying to isolate. If this is the case with your order, please use the comments field during the checkout process to indicate "Ground shipping requested". Sorry about […]
New Bundle: The Northern Lights!
Dave Hrynkiw
December 6, 2012
Ok, more like The Northern light. There's only one, but it creates lots of light!
We made the SB-Firefly as a ATtiny85-based blinky light / "chewing-gum & duct-tape problem solver", that is also Digispark compatible.
We made the Star Controller 3-watt RGB LED kit as an easy way to tame bright and power-hungry LEDs.
We put them together with a 3-day power supply and diffusing container, add a 10% savings, and TaDAAAH: The Northern Lights Bundle! And it's well documented too!
What do you get in the bundle?
- 60140 SB-Firefly kit
- 60160 Star Controller RGB 3-watt LED kit
- 52242 2.1mm barrel jack/plug pair
- 17020 3AA battery holder
- 0.1µF Capacitor
- 8025 diffusion container
- Double-sided tape
- 5-conductor wire
Start with our instructions to build a mobile blinky-dome of doom (mount it on your bicycle helmet - everybody will see you coming), or modify it. The SB-Firefly is programmable with the Arduino programming enviroment (with a suitable in-circuit programmer), so you can use the remaining 2 available I/O pins to blend it into your project!
MORE POSTS
Tilden 'bots "TO THE MOOOOON"! And Web-d...
Here's a link recently posted by cbrenizer (I'll keep the full email address off for spam-proofing
ScoutWalker III Prototype Kit Workshop
Steve Jones over at Bug'n'Bots has been working with us to be our official test-base for our new upcoming BEAM Walker Kit - the ScoutWalker III. In preparation for the 2004 Eastern Canadian Robot Games, Bug'n'bots is hosting a special workshop featuring this new beta-version kit. This new robot kit uses a very comprehensive BEAM […]
New Product: Arduino WiFi Shield and Dis...
The lonely product in the long-time-ago previous product post has filed a complaint to the INPDL (International New Product Defendant League) against having to represent the Friday Product Post by itself for an entire month. We therefore had to comply by bringing in some new stock to switch out. So here's an Arduino WiFi Shield […]
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.