New Bundle: The Northern Lights!

Dave Hrynkiw
December 6, 2012

Ok, more like The Northern light. There's only one, but it creates lots of light!

We made the SB-Firefly as a ATtiny85-based blinky light / "chewing-gum & duct-tape problem solver", that is also Digispark compatible.

We made the Star Controller 3-watt RGB LED kit as an easy way to tame bright and power-hungry LEDs.

We put them together with a 3-day power supply and diffusing container, add a 10% savings, and TaDAAAH: The Northern Lights Bundle! And it's well documented too!

What do you get in the bundle?

  • 60140 SB-Firefly kit
  • 60160 Star Controller RGB 3-watt LED kit
  • 52242 2.1mm barrel jack/plug pair
  • 17020 3AA battery holder
  • 0.1µF Capacitor
  • 8025 diffusion container
  • Double-sided tape
  • 5-conductor wire

Start with our instructions to build a mobile blinky-dome of doom (mount it on your bicycle helmet - everybody will see you coming), or modify it. The SB-Firefly is programmable with the Arduino programming enviroment (with a suitable in-circuit programmer), so you can use the remaining 2 available I/O pins to blend it into your project!

MORE POSTS

December 15, 2014
Monday New Product: Sound, Powerboost an...

The alien flying badgers invaded the office, so the Friday product release was postponed. It is Monday, and the badgers are tamed and put to work to bring you more product than ever: A4988 Stepper Motor Driver Carrier, Black $7.49 It's an upgraded version of the standard A4988 stepper driver module from Pololu. Adafruit Audio […]

January 29, 2019
Tips & Tricks Working with Thermopl...

Today we are going to be taking a look at one of our favorite go-to materials for easy molding and quick repair, Caprolactone Thermoplastic! This plastic, more commonly known as ShapeLock, Friendly Plastic, Instamorph or Polymorph, is a biodegradable polyester with a low melting point. When solid, it has physical properties of a very tough, […]

January 12, 2003
Cool project

Neil Sandstrom from the BEAM mailing list recently posted a notice about his "ShokHead" circuit built from our tutorial. What makes this project a bit different is that he mounted it on a VPM motor, so it's all self-contained. Here's what he says about it: Just finished!!! Check it out it is really small!! http://groups.yahoo.com/group/beam/files/Psyclesam/ […]

May 31, 2006
Solarbotics at MAKE Faire - Proof!

See, I was actually there! Well, at least there's proof that I was. Here's an interview with Bashiba Grossman, showing off her 3D printed artwork. About 1/4 the way in, you'll see a suspicious man show up in the background. Nice hat, eh? Thanks to Floyd on the BEAM-List for pointing this out!

Solarbotics Ltd Logo
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!

Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.

Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.

cart