This week: Blizzards. Ice. Snow drifts. Rather sunny and warm. Wait, what? Yup, we've seen it all this week folks. All that's left is for delicious pastries to start falling from the skies, and we can check off the last item on our home-made "meteorological phenomena" list. And boy, you have no idea how long […]
New Bundle: The Northern Lights!
Dave Hrynkiw
December 6, 2012
Ok, more like The Northern light. There's only one, but it creates lots of light!
We made the SB-Firefly as a ATtiny85-based blinky light / "chewing-gum & duct-tape problem solver", that is also Digispark compatible.
We made the Star Controller 3-watt RGB LED kit as an easy way to tame bright and power-hungry LEDs.
We put them together with a 3-day power supply and diffusing container, add a 10% savings, and TaDAAAH: The Northern Lights Bundle! And it's well documented too!
What do you get in the bundle?
- 60140 SB-Firefly kit
- 60160 Star Controller RGB 3-watt LED kit
- 52242 2.1mm barrel jack/plug pair
- 17020 3AA battery holder
- 0.1µF Capacitor
- 8025 diffusion container
- Double-sided tape
- 5-conductor wire
Start with our instructions to build a mobile blinky-dome of doom (mount it on your bicycle helmet - everybody will see you coming), or modify it. The SB-Firefly is programmable with the Arduino programming enviroment (with a suitable in-circuit programmer), so you can use the remaining 2 available I/O pins to blend it into your project!
MORE POSTS
Project Monday: The Story of SharkBot
Not every product we design is destined to make it to the consumer. Sometimes a great idea gets taken to completion before we realize that one factor or another dooms it to an existence in our failed project bin. One such project that now lives a watery grave is the Sharkbot. Akin to our much […]
Solarbotics at the ECRG
Well, somebody from Solarbotics will be at the Eastern Canadian Robot Games, namely Dave Hrynkiw, and Grant McKee. If you're going to be out in the Toronto region this weekend (October 26 and 27), come by and see the games at the Ontario Science Center!
New Treads...nummy!
We've got an inventory in of treads, cogs, and idlers that mate up with our GM2/3/8/9 gear motors! You wanna build a photovore or Herbie with attitude? Get at it! You may want to pay special attention to the GMTPkg tread deal. It includes a pair of GM2/3/8/0 style gear motors, so you're ready to […]
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.