New Bundle: The Northern Lights!

Dave Hrynkiw
December 6, 2012

Ok, more like The Northern light. There's only one, but it creates lots of light!

We made the SB-Firefly as a ATtiny85-based blinky light / "chewing-gum & duct-tape problem solver", that is also Digispark compatible.

We made the Star Controller 3-watt RGB LED kit as an easy way to tame bright and power-hungry LEDs.

We put them together with a 3-day power supply and diffusing container, add a 10% savings, and TaDAAAH: The Northern Lights Bundle! And it's well documented too!

What do you get in the bundle?

  • 60140 SB-Firefly kit
  • 60160 Star Controller RGB 3-watt LED kit
  • 52242 2.1mm barrel jack/plug pair
  • 17020 3AA battery holder
  • 0.1µF Capacitor
  • 8025 diffusion container
  • Double-sided tape
  • 5-conductor wire

Start with our instructions to build a mobile blinky-dome of doom (mount it on your bicycle helmet - everybody will see you coming), or modify it. The SB-Firefly is programmable with the Arduino programming enviroment (with a suitable in-circuit programmer), so you can use the remaining 2 available I/O pins to blend it into your project!

MORE POSTS

November 22, 2005
Sumovore Code Updates

Hi all. For all you Sumovore-owners, just a note to let you know that the new Atmel-WinAVR code is online (Atmel brainboard page under resources). Just some tweaks to make it compatible with the latest versions of WinAVR. Also, Dan Peirce has ported the JAL portion of the '877 brains to the Hi-Tech PICCLite compiler, […]

January 29, 2019
Tips & Tricks Working with Thermopl...

Today we are going to be taking a look at one of our favorite go-to materials for easy molding and quick repair, Caprolactone Thermoplastic! This plastic, more commonly known as ShapeLock, Friendly Plastic, Instamorph or Polymorph, is a biodegradable polyester with a low melting point. When solid, it has physical properties of a very tough, […]

May 23, 2003
GM2/3 with Wheel combination deals

We're saving you some hassle and money by now offering our popular GM2 or GM3 gear motor with a GMPW wheel! Save a few bucks and order them as a set.

October 23, 2023
Protected: 3D Printer Training - Crealit...

There is no excerpt because this is a protected post.

Solarbotics Ltd Logo
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!

Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.

Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.

Copyright © 2024 Solarbotics Ltd. All Rights Reserved
cart