We are expecting some outages while we perform some upgrades. Shouldn't be longer than a few hours, starting at 8pm MST May 6.
New Bundle: The Northern Lights!
Dave Hrynkiw
December 6, 2012
Ok, more like The Northern light. There's only one, but it creates lots of light!
We made the SB-Firefly as a ATtiny85-based blinky light / "chewing-gum & duct-tape problem solver", that is also Digispark compatible.
We made the Star Controller 3-watt RGB LED kit as an easy way to tame bright and power-hungry LEDs.
We put them together with a 3-day power supply and diffusing container, add a 10% savings, and TaDAAAH: The Northern Lights Bundle! And it's well documented too!
What do you get in the bundle?
- 60140 SB-Firefly kit
- 60160 Star Controller RGB 3-watt LED kit
- 52242 2.1mm barrel jack/plug pair
- 17020 3AA battery holder
- 0.1µF Capacitor
- 8025 diffusion container
- Double-sided tape
- 5-conductor wire
Start with our instructions to build a mobile blinky-dome of doom (mount it on your bicycle helmet - everybody will see you coming), or modify it. The SB-Firefly is programmable with the Arduino programming enviroment (with a suitable in-circuit programmer), so you can use the remaining 2 available I/O pins to blend it into your project!
MORE POSTS
Wednesday Links: Robots, Chocolate and G...
Everything is better with chocolate, even the new links: Self-Folding Paper Robot Inspired by origami paper sculptures and equipped with motor. (Via Beautiful Decay) Edible Chocolate LEGOs Mmmm, best Lego ever. (Via Colossal) Drawing Robot Seen lots of drawing robots before, but this one uses fans to create vacuum and attach itself to the metal […]
New Product: Synapse & ESP
Synapse 220 Modules RF220SU SNAP Engine, 2 Mbps 2.4 GHz CAD40.43/USD29.95 WiFi is good, but the SNAP Engine Model RF220SU is an IEEE 802.15.4, low-power, very robust solution for embedded wireless control and monitoring networks. With auto-mesh networking (try that WiFi...). 2Mbps on the 2.4GHz spectrum and RP-SMA or U.FL selectable antenna. Synapse RF220UF1 CAD40.43/USD29.95 […]
Aleph Objects (Lulzbot) is still alive! ...
Update: Additional information from the Loveland Reporter Herald We've been big fans of Aleph Objects' 3D printers. They fit that sorta "Prosumer" niche. A bit better than kit-builds, not quite as expensive as the big professional units. We were disappointed we got the call a few months ago relating that Aleph was looking to shut […]
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.