EDIT: Our wizards were successful and everything should be displaying properly now! Hi everyone, we've noticed that our website is having trouble with displaying images. We have our IT wizards working on it right now and should be back up and running like normal shortly! If you have any questions or concerns please email us […]
New Bundle: The Northern Lights!
Dave Hrynkiw
December 6, 2012
Ok, more like The Northern light. There's only one, but it creates lots of light!
We made the SB-Firefly as a ATtiny85-based blinky light / "chewing-gum & duct-tape problem solver", that is also Digispark compatible.
We made the Star Controller 3-watt RGB LED kit as an easy way to tame bright and power-hungry LEDs.
We put them together with a 3-day power supply and diffusing container, add a 10% savings, and TaDAAAH: The Northern Lights Bundle! And it's well documented too!
What do you get in the bundle?
- 60140 SB-Firefly kit
- 60160 Star Controller RGB 3-watt LED kit
- 52242 2.1mm barrel jack/plug pair
- 17020 3AA battery holder
- 0.1µF Capacitor
- 8025 diffusion container
- Double-sided tape
- 5-conductor wire
Start with our instructions to build a mobile blinky-dome of doom (mount it on your bicycle helmet - everybody will see you coming), or modify it. The SB-Firefly is programmable with the Arduino programming enviroment (with a suitable in-circuit programmer), so you can use the remaining 2 available I/O pins to blend it into your project!
MORE POSTS
3D Printed frame for Line Follower
Ohhh, we like 3D printers. We're working with the local Protospace to fund-raise for a Makerbot. I want to see one of these Line Follower chassis (especially as some of the parts look particularly familiar!). LOVE open source hardware!
Circuit: Herbie by Randy Sargent
Although not a true BEAM robot, this simple schematic by Randy Sargent is small, simple, slick, and effective. My own version uses a pair of pager motors and three cells from a 9V rechargeable battery. Hard to get any simpler than this device!
Monday New Product: Enclosures, FeatherW...
Acrylic Enclosure for the 1018 Interface Kit 8/8/8 $11.50 The 3804 Enclosure is designed to protect the PhdgetInterfaceKit 8/8/8 while giving you access to all terminals and connectors through openings in the enclosure. Acrylic Enclosure for the 1014 Interface Kit 0/0/4 $11.50 Acrylic Enclosure for Phidget Interface Kit (#3802) DC Motor + Stepper FeatherWing Add-on […]
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.