Netduino!

Dave Hrynkiw
February 18, 2011

Netduino PlusNot just another *uino clone, as this uses a 32-bit Atmel AT91SAM7X ARM microcontroller. Sure, it uses the same form factor (well, except for the breadboard-friendly mini version), but the Netduino uses the .NET micro framework.

What's that mean? Well, you're using a hugely more capable microcontroller (8-bit vs 32 bit), with much more memory (32kB vs 512kB), multi-thread programming, debugging, and event-based programming.

If you're comfortable with most MS programming tools, you'll be very comfortable trying out microcontrollers with the Netduino. And being Arduino shield-compatible, you've got a world of accessories available to you.

We're carrying the whole Netduino lineup, including the standard, the Plus (with ethernet & SD Card), and the 0.6"-wide DIP mini.

MORE POSTS

September 13, 2005
Solarbotics Event Sponsorship

Brian Fields is heading up a new BEAM botting competition which Solarbotics is proud to be in association with. To borrow from the website: To enter this contest all you have to do is build the smallest robot you can in one of these three categories Turbot, Walker, or Photovore. This contest is much like […]

January 19, 2004
Sumovores roll over Italy again!

Another msg from our Italian contacts: Sumovores do well at the Pisa! Here's a Google-translated link.

April 27, 2005
Sumovore Upgrade Kit

What's new at Solarbotics? We've just released our Sumovore Baseplate Upgrade Kit which will let you replace the mounting tape & zip-tie restraints with a black powder-coated steel baseplate! This upgrade makes the Sumovore much more robust, and also increases the mass for a more competitive edge. Note that all new Sumovores from Solarbotics will […]

November 7, 2014
Friday New Product: eSun Filament, Push ...

Today we have a rainbow of colorful stuff, which apparently doesn't look anything like it at the moment, but believe me, it is. eSun 1.75mm PLA filament - 1kg Spool $30.00 1.75mm PLA filament for 3D printing. PLA is an excellent general purpose filament with a great finish, very rigid and biodegradable. eSun 1.75mm ABS […]

1 83 84 85 86 87 253
Solarbotics Ltd Logo
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!

Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.

Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.

cart