Wee, more protoboards! Now this is the last batch, we don't got no more. Next time it will be something else, I promise. PadBoard-1 Pad-per-Hole, 80x50mm Solder Protoboard $3.75 A tight and tidy one-pad-per-hole, plated-through, double-sided board. Ideal for wildly-wired, small projects! PadBoard-2, Pad-Per-Hole, 80x100mm Solder Protoboard $6.82 For the ultimate in protoboard flexibility, here's […]
Netduino!
Dave Hrynkiw
February 18, 2011
Not just another *uino clone, as this uses a 32-bit Atmel AT91SAM7X ARM microcontroller. Sure, it uses the same form factor (well, except for the breadboard-friendly mini version), but the Netduino uses the .NET micro framework.
What's that mean? Well, you're using a hugely more capable microcontroller (8-bit vs 32 bit), with much more memory (32kB vs 512kB), multi-thread programming, debugging, and event-based programming.
If you're comfortable with most MS programming tools, you'll be very comfortable trying out microcontrollers with the Netduino. And being Arduino shield-compatible, you've got a world of accessories available to you.
We're carrying the whole Netduino lineup, including the standard, the Plus (with ethernet & SD Card), and the 0.6"-wide DIP mini.
MORE POSTS
Wednesday Cool Links: Theremin Goggles, ...
Shooting analog pictures, shooting bullets underwater, shooting… theremin noises from goggles, shooting… human-powered helicopters! if that doesn’t make any sense, see the links below: Steampunk theremin goggles A wicked build by [Sarah] - theremin steampunk goggles. Photo sensor will feel the amount of light and the slider would adjust the pitch of the sound produced. Check […]
Wednesday Links: Phenakistoscope, 3D Pri...
Wednesday links are back, with more wednesdayness and linkness. Or linkedness. In any case, after the holidays we got better. More rested, more well-fed, more exercised, more healthy, more balanced, more busy, more relaxed, more organized, more happy... Er, I think these were New Year resolutions... All I mean is that we are finally back […]
Closed Monday for the holiday
Not sure what holiday it is, but my calendar says that nobody will be in on Monday "for the holiday". We'll be back to work Tuesday morning, promise!
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.