Netduino!

Dave Hrynkiw
February 18, 2011

Netduino PlusNot just another *uino clone, as this uses a 32-bit Atmel AT91SAM7X ARM microcontroller. Sure, it uses the same form factor (well, except for the breadboard-friendly mini version), but the Netduino uses the .NET micro framework.

What's that mean? Well, you're using a hugely more capable microcontroller (8-bit vs 32 bit), with much more memory (32kB vs 512kB), multi-thread programming, debugging, and event-based programming.

If you're comfortable with most MS programming tools, you'll be very comfortable trying out microcontrollers with the Netduino. And being Arduino shield-compatible, you've got a world of accessories available to you.

We're carrying the whole Netduino lineup, including the standard, the Plus (with ethernet & SD Card), and the 0.6"-wide DIP mini.

MORE POSTS

January 13, 2011
SparkFun Free-Day Aftermath

After last year's meltdown of servers during SparkFun's 1st "Free Day", we sent them flowers of condolence. This year, after seeing that little image of a burning computer on their error webpage , we felt he urgent need to send down the entire Canadian fire brigade (yup, both extinguishers). And who better to put out […]

June 17, 2003
Escaps back in stock!

Well, the last batch of Escap gearmotors went very fast. Let's hope this batch lasts a bit longer! Unlike the last set, this set has a higher reduction ratio of 663:1 instead of 362:1. This means it starts turning 0.46V (!) drawing only 3.3mA (!!) It's a 3V rated motor, but our tests show that […]

October 22, 2002
Solarbotics at the ECRG

Well, somebody from Solarbotics will be at the Eastern Canadian Robot Games, namely Dave Hrynkiw, and Grant McKee. If you're going to be out in the Toronto region this weekend (October 26 and 27), come by and see the games at the Ontario Science Center!

November 8, 2006
New TINY Pogo Pin Probes

We had some requests for some really, really small Pogo Push Pin Probes (Hmmm...shoulda named them PPPPs...). Anyway, here's the PP8s and the PPH2, which are the "short" version of the PP8 and the necessary holder to mount them. If you have really tight spaces you need to test, these are the probes you'll need!

Solarbotics Ltd Logo
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!

Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.

Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.

cart