Moved In and Headin' Out

Dave Hrynkiw
May 8, 2010

What a cah-razy week we've had. We're officially all moved in at our new location. There are still mounds of boxes to unpack and things to organize and some renovations to finish, but, all things considered, it went pretty well. If you happen to know where my USB extension cable went, though, I'd love to know.

But yes, business has resumed to normal operations and things are going along smoothly. We're filling and shipping orders and returning all the correspondence that has piled up over the last week. Enjoy it while you can, though, because it will probably only last for the next week or so. We're gearing up to head out to the San Francisco Maker Faire. (Quick! Load up everything we own into moving vans! Quick! Unpack everything we own from the moving van and put it in the new office! Quick! Pack up a completely different van with a good portion of what we own to take down to California! Etc, etc) While we're still trying to determine specifics, it's fairly safe to assume that we will be closed for a few days while attending Maker Faire. We'll be sure to post the relevant information as the time draws near.

Solarbotics Laser Engraver IIISo what else is going on around these parts? We're this close to releasing our latest kit - the BeetleBot. Once we get the last parts in and the documentation tuned up, this solderless kit will be made available for purchase. We're also about to have our latest catalogue printed, but that might be more exciting for us (particularly me, being the graphics dood) than anyone else. In the community, Ted pointed us towards his PICAXE site, which is absolutely crammed with loads of good and helpful PICAXE stuff - we recommend giving it a look. Dave also just posted a bunch more vintage BEAM pics to our Flickr stream, which you can see here. Oh, and did we mention that our laser caught fire? And that it happened while running some last-minute jobs during the office move? Yeah, that was fun.

MORE POSTS

October 20, 2011
The Many Faces of SAFE

The SAFE (Solarbotics Arduino Freeduino Enclosure) is a marvelous contraption of laser-cut acrylic that makes a complete enclosure for your Arduino project. It gives you a protective shell with enough room for a basic shield, with knock-outs for power and USB connection. It even has a power switch. The big problem with Arduinos and Freeduinos, […]

January 13, 2016
Wednesday Links: Arduino Theremin &...

Arduino Theremin Theremin is a fascinating musical instrument, and this is a version that runs on Arduino, by Urs Gaudenz of  Gaudi Lab (Via Arduino Blog) Travertine and Resin Table Top Topographical lagoon tables by Alexandre Chapelin of LA Table (Via Colossal) 3D Modeling Sharks and Other Creatures Sharks and other wonderful living things refuse to […]

March 15, 2004
New Solar Cell!

As Panasonic is no longer manufacturing their line of Sunceram solar cells, we've been on the hunt for suitable replacements. Here's our first find - the SCC3733! It's a polycrystaline cell in an epoxy casing, so it's a bit heavier, but much, much less prone to breaking or burning off of the solder-pads. It's also […]

February 17, 2006
New Gearmotor - the GM17

Hellooooo! I love getting new gearmotors to test. I get to break them apart, poke them, submit them to torture test - it's all great fun. My latest victim of inspection is our new GM17 HE Offset gearmotor. It uses a very power efficient 300-form factor motor to drive the 228:1 gearbox. It isn't a […]

Solarbotics Ltd Logo
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!

Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.

Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.

cart