Moved In and Headin' Out

Dave Hrynkiw
May 8, 2010

What a cah-razy week we've had. We're officially all moved in at our new location. There are still mounds of boxes to unpack and things to organize and some renovations to finish, but, all things considered, it went pretty well. If you happen to know where my USB extension cable went, though, I'd love to know.

But yes, business has resumed to normal operations and things are going along smoothly. We're filling and shipping orders and returning all the correspondence that has piled up over the last week. Enjoy it while you can, though, because it will probably only last for the next week or so. We're gearing up to head out to the San Francisco Maker Faire. (Quick! Load up everything we own into moving vans! Quick! Unpack everything we own from the moving van and put it in the new office! Quick! Pack up a completely different van with a good portion of what we own to take down to California! Etc, etc) While we're still trying to determine specifics, it's fairly safe to assume that we will be closed for a few days while attending Maker Faire. We'll be sure to post the relevant information as the time draws near.

Solarbotics Laser Engraver IIISo what else is going on around these parts? We're this close to releasing our latest kit - the BeetleBot. Once we get the last parts in and the documentation tuned up, this solderless kit will be made available for purchase. We're also about to have our latest catalogue printed, but that might be more exciting for us (particularly me, being the graphics dood) than anyone else. In the community, Ted pointed us towards his PICAXE site, which is absolutely crammed with loads of good and helpful PICAXE stuff - we recommend giving it a look. Dave also just posted a bunch more vintage BEAM pics to our Flickr stream, which you can see here. Oh, and did we mention that our laser caught fire? And that it happened while running some last-minute jobs during the office move? Yeah, that was fun.

MORE POSTS

December 9, 2015
Wednesday Links: Tattoos, Laser Cutting ...

Temporary Tattoos to Monitor Vitals An lighter more wearable alternative to FitBit (Via Beautiful Decay) Laser-Cut Wood Illustrations Layering laser-cut wood taken to a whole new level, by Martin Tomsky (Via Colossal) Tiny V8 Engine Out of Paper Paper can be exceptionally sturdy, especially when strengthened by glue. By Aliaksei Zholner (Via Gizmodo) REM Detection […]

October 31, 2014
Solarbotics Halloween PumLantern Hack

This is a message that does not announce Halloween a stat holiday at Solarbotics - but enhances the Halloween spirit by bringing you a fancy porch or window decoration idea. We call it the   Pum-kin-Lantern! Here's an easy recipe: take the guts of Pum Lantern, place it in a mixing bowl with some pumpkins, add […]

August 13, 2011
New Sure Electronics Items, EZ-B Wall-E ...

Howdy folks. I have some bad news. It has just become painfully apparent that the summer is a mere two weeks from its conclusion. Where did it all go? Can't we have a little bit longer? Please? Hrmph, I guess not. That means we need to make the best of the next dozen-or-so days by […]

November 1, 2001
New Items!

Besides introducing a whole new batch of Push-Pogopins (and their measurements) into the 'misc' category, we've just introduced our 'D2' Germanium Diode. This diode is pretty good - better than the 1N270 and 1N34 types, with a voltage dropout of only 0.36V at 50mA! We're not exactly sure what type it is, but since we […]

Solarbotics Ltd Logo
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!

Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.

Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.

cart