Moved In and Headin' Out

Dave Hrynkiw
May 8, 2010

What a cah-razy week we've had. We're officially all moved in at our new location. There are still mounds of boxes to unpack and things to organize and some renovations to finish, but, all things considered, it went pretty well. If you happen to know where my USB extension cable went, though, I'd love to know.

But yes, business has resumed to normal operations and things are going along smoothly. We're filling and shipping orders and returning all the correspondence that has piled up over the last week. Enjoy it while you can, though, because it will probably only last for the next week or so. We're gearing up to head out to the San Francisco Maker Faire. (Quick! Load up everything we own into moving vans! Quick! Unpack everything we own from the moving van and put it in the new office! Quick! Pack up a completely different van with a good portion of what we own to take down to California! Etc, etc) While we're still trying to determine specifics, it's fairly safe to assume that we will be closed for a few days while attending Maker Faire. We'll be sure to post the relevant information as the time draws near.

Solarbotics Laser Engraver IIISo what else is going on around these parts? We're this close to releasing our latest kit - the BeetleBot. Once we get the last parts in and the documentation tuned up, this solderless kit will be made available for purchase. We're also about to have our latest catalogue printed, but that might be more exciting for us (particularly me, being the graphics dood) than anyone else. In the community, Ted pointed us towards his PICAXE site, which is absolutely crammed with loads of good and helpful PICAXE stuff - we recommend giving it a look. Dave also just posted a bunch more vintage BEAM pics to our Flickr stream, which you can see here. Oh, and did we mention that our laser caught fire? And that it happened while running some last-minute jobs during the office move? Yeah, that was fun.

MORE POSTS

June 11, 2007
Solarbotics looking for fun people

...oh, and they also should want to work with us. We have a few positions open we want to fill with people that have a good sense of humour, have some geek qualities, and can tell the difference between a diode and resistor (or sincerely want to learn!) Here are the types of people we're […]

May 7, 2015
Rainbow Brite Dress Project

Cosplay at Solarbotics We have a bit of a rule here. If there's a project we want to do, somebody has to have the passion for it. The drive, the dedication, the "kick-the-right-people-in-the-butt-to-get-it-done" drive. In this case, the project is a Rainbow Brite Dress, as spear-headed by our warehouse chief-elf Lyn Janelle (costume concept, design […]

September 24, 2002
Tilden Lecture in Pasadena

A quick message from Mark W. Tilden...: Just a heads up that following a lecture by yours truly ("World Domination through Robot Toy Marketing"), 200 BIObugs will be released for mass behavioral experiments on Sunday, October 13 at the Ritz-Carlton in Pasadena, CA. Could be a record for the largest array of cooperating autonomous robots […]

June 17, 2003
Escaps back in stock!

Well, the last batch of Escap gearmotors went very fast. Let's hope this batch lasts a bit longer! Unlike the last set, this set has a higher reduction ratio of 663:1 instead of 362:1. This means it starts turning 0.46V (!) drawing only 3.3mA (!!) It's a 3V rated motor, but our tests show that […]

1 8 9 10 11 12 253
Solarbotics Ltd Logo
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!

Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.

Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.

cart