Not every product we design is destined to make it to the consumer. Sometimes a great idea gets taken to completion before we realize that one factor or another dooms it to an existence in our failed project bin. One such project that now lives a watery grave is the Sharkbot. Akin to our much […]
More PICAXE Goodness
Dave Hrynkiw
May 1, 2009
Boy oh boy, it's been a busy week for PICAXE stuff. We actually got a big ol' shipment in late last week, which included the new 40X2 chips. And by now we've receiveded everything, including even more X2 chips. But this time they're of the 28-pin variety. (Don't worry, the 28X1's haven't gone the way of the dodo bird... yet...)
Just like the 40X2's we mentioned last week, the 28X2 comes in both regular and a low-voltage versions. Here are the improvements in the 28X2 revision over the 28X1:
- Up to 4 internal program slots and 32 external program slots
- Increased RAM, up to 256 bytes + 1024 bytes scratchpad
- Increased operating speed, up to 40MHz
- Individual pin input/outut control
- 0-8 ADC pins available
Aside from that, we also received stock on the PICAXE-20M IC and the PICAXE-18X IC. They're now back online and can be purchased at your desire. We got lots of 'em too, so get as many as you want.
We have just one more tidbit to include before the end of this week's newspost. Over at the HydraRaptor blog, the auther, nophead, wrote a great little article detailing how to convert/hack one of our GM17's into a stepper motor. He uses some of the neat-o Didel accessories we added a few weeks back, specifically the replacement gears. You can read the article right here.
MORE POSTS
Wednesday Cool Links
Here we go, it’s the W day again. Seems like the previous one was two infinities ago. During that infinite time we had plenty of opportunities to pick the interesting stuff floating around internets, and bring it to you: Headphone Light Show EL (electroluminescent) wire is a cool thing. Add it to the headphones and […]
New Product: Grove, More Grove & Ko...
Seeed Grove - RTC $6.90 The RTC module is a member of Twig. It is based on the clock chip DS1307 which supports the I2C protocol. It uses a Lithium cell battery (CR1225). The clock/calendar provides seconds, minutes, hours, day, date, month and year information. Nidec SMD Vibra motor 1.3V DC, 105mA, 9500rpm $3.00 Surface-mount […]
Solarbotics at Bay Area Maker Faire ...S...
Guess what! Like every year, from May 19-20 Solarbotics is going to be at the Bay Area Maker Faire! Well, kinda. While we usually run a full booth to show off all our cool BEAM and Arduino stuff (we even ran a totally rockin' ARDX workshop last time), it unfortunately looks like costs have risen […]
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.