More Grove Parts from SeeedStudio

Solar botics
February 12, 2015

SeeedStudio Grove modules, including a flame sensor, skin conductivity and touch sensors, IR send/receive units, and an ultrasonic sensor. We continue to add to the  Grove items category!

Grove - Flame Sensor
$8.28

An adjustable-sensitivity flame sensor, with Grove interface compatibility.
Grove - GSR Interface
$11.88

Galvanic skin response measures the electrical conductance of skin. This Grove module makes it easy to measure the response across 2 fingers on a hand.
Grove - Infrared Receiver
$5.04

Any project that requires talking to a standard 38kHz IR remote control will work well with this receiver.
Grove - Infrared Emitter
$5.04

Convenient plug-in-and-use Infrared emitter module for the Grove system.
Grove - Ultrasonic Ranger
$19.32
Ultrasonic distance sensor, featuring the plug-in-and-use Grove system.
Grove - Touch Sensor
$5.04
It's a ready-to-use touch sensor switch compatible with the Grove system. Plug it in, tuck it in behind a non-metallic surface, and you are finished.

MORE POSTS

May 4, 2007
Wheee! They're here - the new RW2!

We've just got in our newly-machined RW2 hubs & tires - and they're better! Instead of the old 1/8" axle hole that didn't quite fit the GM11a-14a series correctly (they were too loose), these new ones fit perfectly with their 3mm hole!

April 26, 2010
Sumovore with Bad Attitude?

Has anyone else have reports of attitude problems with the Sumovore?

March 21, 2018
Project: Experiments in Watermelon Filam...

It takes a while to get to know all the quirks of your 3D printer and filament well. We thought we'd add to the knowledge base and share what we've learned about using the eSun 1.75mm PLA filament in Glass Watermelon Red on our Kossel Pro delta style 3D printer.

August 14, 2015
Friday New Product - Grove and RGB LED B...

Grove - 2-Coil Latching Relay $12.84 The Grove latching relays are interesting because they take a pulse to toggle their state, which it maintains even after a power cycle. GrovePi Starter Kit for Raspberry Pi $116.87 Carrying a GrovePi+ board together with 12 carefully selected Grove sensors with 10 pieces cables, this starter kit gets […]

Solarbotics Ltd Logo
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!

Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.

Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.

Copyright © 2024 Solarbotics Ltd. All Rights Reserved
cart