150mm Futaba-style Servo cable, Double Female $1.95 Just a standard 0.1" pitch Futaba-style servo jumper cable, with female connectors on both sides. JST XH 2.5mm - 3 Pin plug & 100mm cable set $0.65 The JST XH 3-pin header & cable set. 100mm long, 2.5mm pin pitch. Raspberry Pi GPIO Ribbon 40-pin Cable, 6" long […]
More Grove Parts from SeeedStudio
Solar botics
February 12, 2015
SeeedStudio Grove modules, including a flame sensor, skin conductivity and touch sensors, IR send/receive units, and an ultrasonic sensor. We continue to add to the Grove items category!
|
Grove - Flame Sensor $8.28 An adjustable-sensitivity flame sensor, with Grove interface compatibility. |
 |
Grove - GSR Interface $11.88 Galvanic skin response measures the electrical conductance of skin. This Grove module makes it easy to measure the response across 2 fingers on a hand. |
 |
Grove - Infrared Receiver $5.04 Any project that requires talking to a standard 38kHz IR remote control will work well with this receiver. |
 |
Grove - Infrared Emitter $5.04 Convenient plug-in-and-use Infrared emitter module for the Grove system. |
 |
Grove - Ultrasonic Ranger $19.32 Ultrasonic distance sensor, featuring the plug-in-and-use Grove system. |
 |
Grove - Touch Sensor $5.04 It's a ready-to-use touch sensor switch compatible with the Grove system. Plug it in, tuck it in behind a non-metallic surface, and you are finished. |
MORE POSTS
New Product: Grove, More Grove & Ko...
Seeed Grove - RTC $6.90 The RTC module is a member of Twig. It is based on the clock chip DS1307 which supports the I2C protocol. It uses a Lithium cell battery (CR1225). The clock/calendar provides seconds, minutes, hours, day, date, month and year information. Nidec SMD Vibra motor 1.3V DC, 105mA, 9500rpm $3.00 Surface-mount […]
Iron Man & Solarbotics at Comic Exp...
We often work with people with very interesting projects. This time, it's an impressive Iron Man MkIII costume build, by Phillip Vatour of Calgary. Phillip had come into our offices one day and said: "You might be interested in seeing what I've been building with the stuff I buy here...". He pulled out his phone […]
BEP Documentation Correction...
Just a quick note for those of you who have been trying to build the SC1 Servocores with the 0.01uF capacitors as listed in the parts list. That's an error! 0.1uF is just fine. Documentation has been revised accordingly. Sorry for the error!
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.