Monday New Product: Enclosures, FeatherW...

Solar botics
March 21, 2016
Acrylic Enclosure for the 1018 Interface Kit 8/8/8
$11.50

The 3804 Enclosure is designed to protect the PhdgetInterfaceKit 8/8/8 while giving you access to all terminals and connectors through openings in the enclosure.
Acrylic Enclosure for the 1014 Interface Kit 0/0/4
$11.50
Acrylic Enclosure for Phidget Interface Kit (#3802)

DC Motor + Stepper FeatherWing Add-on For All Feather Boards
$26.56

This is the DC Motor + Stepper FeatherWing which will let you use 2 x bi-polar stepper motors or 4 x brushed DC motorx (or 1 stepper and 2 DC motors).

SparkFun Beefy 3 - FTDI Basic Breakout 3.3V
$19.95
FTDI USB-TTL 3V3 Header with MOOCHO power!
WiFi Module - ESP8266 (ESP01)
$6.00

ESP8266 (ESP01 Form Factor)

 

MORE POSTS

July 31, 2009
Resistance is Futile if < 1ohm

Hey, look at us! We made a witty, over-used joke! But seriously, this week we have a schwack-load of resistors for you. Normally we save most of these for our internal use, but what's so fun about that? So we've gone ahead and opened up our entire inventory of  5% accuracy, 1/4 watt resistors. There […]

September 14, 2000
Minor Additions and New Links

Boy, there's work to do on new websites. Link checking, spell checking, image links - all sorts of crap that doesn't have anything to do directly with robots! Even so, we've been able to put up a few new images of Mark Tilden's "Projectorbots" on the Photovores page. Yuck. Must do something about how hard […]

January 11, 2017
Heated Car Seat Teardown and Repair

Here's a little makeover of an inexpensive aftermarket car seat heating pad that stopped working. Designed to activate and warm up when sat upon, the electronics face a fair amount of abuse: since the seat is a soft frame, the wires inside constantly move and flex with the body. They are also subject to harsh […]

November 7, 2019
Lulzbot 3D Printer Documentation and Res...

Lulzbot Mini 2 Documentation Lulzbot Mini 2 Quick Start Guide Lulzbot Mini 2 Quick Start Video How to use the LCD Interface Video How to Replace a Damaged/Bubbled PEI Sheet Video How to update your firmware Video How to use Cura: Lulzbot Edition Software Video (slightly outdated but relevant) Lulzbot Mini 2 Detailed Calibration and […]

Solarbotics Ltd Logo
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!

Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.

Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.

cart