A handy tutorial explaining how to put together the RGB LED Horns. Make your own, or get a kit with everything included (except for the paint). Supplies: Fosshape 300 2 x slow scroll RGB LED 2 x coin cell batteries conductive thread 2 x coin cell battery holder - sewable 2 x pieces of velcro […]
Makin' (New) Connections
Dave Hrynkiw
January 19, 2012
Well, it's been a riveting week. We did all sorts of exciting things, like definitely not riding a pallet jack down a flight of stairs and off a totally awesome jump. Nope, didn't happen at all. And just like how our tech's face didn't connect with the ground after the jump he didn't take, we thought it'd be a good idea to celebrate this not-event with some new connector-type-stuff. And a motor. Because everyone loves motors.
 |
Mabuchi RF500TB Mabuchi Motor - $4.95 A very efficient, powerful, slow pancake motor. Mabuchi makes some of the best volume-manufactured motors in the world. They're usually a premium over "clone" motors, but for good reason. |
 |
2.1mm DC Power Plug Short - $1.75 This is a standard DC-style female plug, that comes as the connector itself plus a screw-on plastic casing. |
 |
Telecom & Ethernet 4P-4C Clear Male Plug - $0.31 USD / $0.33 CAD This is the standard connection type that's used for hooking up those wired telephone handsets that you barely see around any more. It has four pins, gold connections, and a clear housing. Exciting stuff. |
 |
3-Pin Jumper Wire - F/F, 35cm - $1.95 USD / $2.05 CAD Each cable is 35cm (about 13.75") long, and features a 3-pin JST Re connector at each end. They're fairly standard units, often used on 0.1" breakaway headers. |
 |
1-Pin Jumper Wire - F/F, 16cm, Bundle of 10 - $3.95 USD / $4.15 CAD These jumpers come in packs of 10, and measure 155mm (6.1") with a female connector at each end. They're really helpful for jumping all kinds of things, such as going from board to board or whatever else you have in mind. |
 |
Sharp Sensor Cable (20cm) - $1.95 USD / $2.05 CAD It can be a bit of a pain to get in there and solder up connections for a Sharp sensor, so we've brought in these 3-pin, 20cm (7.87") cables to make life easier. This makes for a convenient connection to standard 0.1" 3-pin headers, such as those used for servos. |
Look at all them connector things. The only challenge now is to find enough things for us to plug into other things. Just like how we definitely don't need to plug in the watermelon launcher to remotely fire when someone hits the doorbell. Nope, that won't freak out the delivery people at all...
MORE POSTS
Arduino Parts and Other Things, Too
Remember the other week when we mentioned how the Arduino Parts category was looking rather thin? Well, we've gone ahead and fattened it up a bit with the following new items: 16MHz Through-Hole Crystal for Arduino Ardubot Bare PCB Barrel Power Jack 2.1mm Connection You might be wondering what the heck does a power jack […]
L298 Compact Motor Driver Kit
Ok, we were fed up with the strange pinouts on the L298 motor driver, and decided to do something about it. The result is the Solarbotics L298 Compact Motor Driver. It happens to be the same size as a BEP tile, offers four status LEDs, plugs for easy wiring, and screw terminals for motor and […]
Monday - Holiday!
May long weekend is upon us up here in Canada, with Victoria Day being Monday. Ahhh, time to melt the igloo, unshovel the lawn mower and scrape away the ice so we can plant snow-peas! (Joke - it's actually quite nice here in Calgary right now...) Anyway, any orders received after 2pm today will not […]
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.