Makin' (New) Connections

Dave Hrynkiw
January 19, 2012

Well, it's been a riveting week. We did all sorts of exciting things, like definitely not riding a pallet jack down a flight of stairs and off a totally awesome jump. Nope, didn't happen at all. And just like how our tech's face didn't connect with the ground after the jump he didn't take, we thought it'd be a good idea to celebrate this not-event with some new connector-type-stuff. And a motor. Because everyone loves motors.

Mabuchi RF500TB Mabuchi Motor Mabuchi RF500TB Mabuchi Motor - $4.95
A very efficient, powerful, slow pancake motor. Mabuchi makes some of the best volume-manufactured motors in the world. They're usually a premium over "clone" motors, but for good reason.
2.1mm DC Power Plug Short 2.1mm DC Power Plug Short - $1.75
This is a standard DC-style female plug, that comes as the connector itself plus a screw-on plastic casing.
Telecom & Ethernet 4P-4C Clear Male Plug Telecom & Ethernet 4P-4C Clear Male Plug - $0.31 USD / $0.33 CAD
This is the standard connection type that's used for hooking up those wired telephone handsets that you barely see around any more. It has four pins, gold connections, and a clear housing. Exciting stuff.
3-Pin Jumper Wire - F/F, 35cm 3-Pin Jumper Wire - F/F, 35cm - $1.95 USD / $2.05 CAD
Each cable is 35cm (about 13.75") long, and features a 3-pin JST Re connector at each end. They're fairly standard units, often used on 0.1" breakaway headers.
1-Pin Jumper Wire - F/F, 16cm, Bundle of 10 1-Pin Jumper Wire - F/F, 16cm, Bundle of 10 - $3.95 USD / $4.15 CAD
These jumpers come in packs of 10, and measure 155mm (6.1") with a female connector at each end. They're really helpful for jumping all kinds of things, such as going from board to board or whatever else you have in mind.
Sharp Sensor Cable (20cm) Sharp Sensor Cable (20cm) - $1.95 USD / $2.05 CAD
It can be a bit of a pain to get in there and solder up connections for a Sharp sensor, so we've brought in these 3-pin, 20cm (7.87") cables to make life easier. This makes for a convenient connection to standard 0.1" 3-pin headers, such as those used for servos.

Look at all them connector things. The only challenge now is to find enough things for us to plug into other things. Just like how we definitely don't need to plug in the watermelon launcher to remotely fire when someone hits the doorbell. Nope, that won't freak out the delivery people at all...

MORE POSTS

November 4, 2002
Junkbots book review

We're happy to say that our new book is being pretty well received! Check out this review at StreeTtech.com!

July 7, 2005
New Solarcell, the SCC3766

Ah, another new solar cell! See? There is a solar aspect to Solarbotics! Come check out the SCC3766 - it's a powerhouse!

January 9, 2012
Phones are Up

Well, we've found the ringleaders in this little impromptu telecommunications insurrection and took them out back, where we switched from our standard 'beat with a metaphorical hammer' to 'beat with an real hammer'. Which worked so well, actually, that our phones are now back up and behaving themselves. We can now take calls without any […]

January 12, 2011
Everybody have a good 2010? Good...

Let's start 2011 by promoting a worthwhile event sponsored by one of our suppliers, SparkFun. Tomorrow is their 2nd "Free Day". Last year's event pretty much crashed their servers (we sent flowers of condolence). This year, they're going about it a bit wiser, offering several ways to taking advantage of their $150,000 give-away. We're big […]

Solarbotics Ltd Logo
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!

Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.

Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.

cart