Maker Faire, Closed Mon. May 24th

Dave Hrynkiw
May 20, 2010

Hey look, we're at Maker Faire!

Hey look, we're at the Solarbotics Office!

...

Hey look, we're like an  amoeba, splitting in half to be in two places at once.

Ok, here's the skinny -  Right now, most of our staff is US-bound to attend the previously mentioned MakerFaire in the San Mateo/Bay Area in California. If you happen to be near by this weekend (22nd and 23rd), be sure to swing by to say hello. And be sure to look around too, there'll be tons of neat stuff to see.

Back at the ranch (the Solarbotics ranch, that is), we're running on a bare-bones skeleton crew. We're still able to process and fill some orders, but there's a good chance there will be a 1-2 business day delay on some until most of the crew returns and we're back to full capacity. Due to the absence of our shipping staff, we are unable to process orders for either UPS or FedEx. It's also important to note that we will be closed on Monday, May 24th for Victoria Day.

So, a quick recap: Maker Faire - go to it. On Monday the 24th, we'll be closed. When open, Solarbotics core services (including telephone and email support, order processing, and package shipping) will be significantly limited. We will do the best we can, but can't make any guarantees until Wednesday of next week (the 26th) when we get back up to strength.

We apologize for the short notice, but the past few weeks have been rather crazy-go-nuts while we try to prepare for Maker. Thanks for your patience!

MORE POSTS

January 25, 2001
We want Your Input!!!

We are working on fixing the bugs in the website, along with a number of other improvements. Some of you may already know that we are rewriting the ordering portion, making processing your BEAM needs that much easier. It is approaching it's release very quickly, we are just doing the final testing now! So give […]

December 14, 2016
New Product: Connectors

150mm Futaba-style Servo cable, Double Female $1.95 Just a standard 0.1" pitch Futaba-style servo jumper cable, with female connectors on both sides. JST XH 2.5mm - 3 Pin plug & 100mm cable set $0.65 The JST XH 3-pin header & cable set. 100mm long, 2.5mm pin pitch. Raspberry Pi GPIO Ribbon 40-pin Cable, 6" long […]

September 18, 2006
Arrrrrrr....

Tis the official “Talk Like a Pirate Day” this fine Septembarrrr the 19th. For all ye landlubberrrrs, thatÂ’s this Tuesday September the 19th. If ye be an unbeliever, check out the official site here. In celebrrration of this fine tradition, we be offerrring a special deal. Everyone knows that every good Pirate needs a swashbucklin-Solarrrr-Speederrrr […]

September 13, 2005
SCC3733 Solarcell hacking

Here's a tip submitted by Rick Steenblik regarding hacking our SCC3733 for less voltage, but more current: After using your SCC3733 solar cells for a couple of bots I noticed that they can be altered to provide about 3.3v at 80ma (in full sun) by cutting the bus connector on the back to electrically separate […]

1 89 90 91 92 93 253
Solarbotics Ltd Logo
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!

Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.

Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.