Still slogging through the backlog of "things to add to the website". One of them is the ScoutWalker/SunSeeker interface instructions, in PDF format (as per usual). So if you want to see exactly how we get the head "talking" to the body, and what the exact circuitry is, come take a look! We also are […]
Maker Faire, Closed Mon. May 24th
Dave Hrynkiw
May 20, 2010
Hey look, we're at Maker Faire!
Hey look, we're at the Solarbotics Office!
...
Hey look, we're like an amoeba, splitting in half to be in two places at once.
Ok, here's the skinny - Right now, most of our staff is US-bound to attend the previously mentioned MakerFaire in the San Mateo/Bay Area in California. If you happen to be near by this weekend (22nd and 23rd), be sure to swing by to say hello. And be sure to look around too, there'll be tons of neat stuff to see.
Back at the ranch (the Solarbotics ranch, that is), we're running on a bare-bones skeleton crew. We're still able to process and fill some orders, but there's a good chance there will be a 1-2 business day delay on some until most of the crew returns and we're back to full capacity. Due to the absence of our shipping staff, we are unable to process orders for either UPS or FedEx. It's also important to note that we will be closed on Monday, May 24th for Victoria Day.
So, a quick recap: Maker Faire - go to it. On Monday the 24th, we'll be closed. When open, Solarbotics core services (including telephone and email support, order processing, and package shipping) will be significantly limited. We will do the best we can, but can't make any guarantees until Wednesday of next week (the 26th) when we get back up to strength.
We apologize for the short notice, but the past few weeks have been rather crazy-go-nuts while we try to prepare for Maker. Thanks for your patience!
MORE POSTS
What's on the burner...
We're working on some new Arduino projects. It's fun working on open-source hardware. Both these projects are out for manufacture now, so hopefully it will only be a few weeks until they are ready. Project One: The GVS Shield We love Phidgets. They have all kinds of useful sensors, to which most subscribe to a […]
BEP Application: Servocore Walker
The following instructions detail how to build a Servocore walker. A Servocore walker differs from a regular walker by utilizing the internal electronics in unmodified servos, which give position feedback from the motor in the servo. This position feedback allows for very long stride lengths without the use of mechanical stops or springs.
BEP Application: Pummer
The following instructions detail how to build a simple pummer using a BC2 (Bicore) BEP (Bicore Experimenter PCB). A pummer is a solar powered self activating LED flasher. The difference between a pummer and a BLFNAR (blinky light for no apparent reason) is that a pummer has a soft turn off, which means that it turns on fast, but slowly fades away.
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.