Ok, more like The Northern light. There's only one, but it creates lots of light! We made the SB-Firefly as a ATtiny85-based blinky light / "chewing-gum & duct-tape problem solver", that is also Digispark compatible. We made the Star Controller 3-watt RGB LED kit as an easy way to tame bright and power-hungry LEDs. We […]
MakeFashion Tech Gala Photos
Solar botics
March 31, 2015
Solarbotics just attended the MakeFashion Gala here in Calgary. It was a glowing show of glowing lights and wearable technology. Check out the photos in our Flickr stream.
Photo courtesy George Dimitrov Photography
Among all the other wonderful things we've seen using our string LEDs before, there was nothing quite as intense as these outfits. Olga Sem, Kat Leto and Marina Ortman did an amazing job of incorporating them into the costumes.
Look at this density! Part of the Joker outfit, photo courtesy Kat Leto.
MORE POSTS
Phone Support Unavailable
Due to a shortage of staff and the Calgary Mini Maker Faire this weekend, we will unfortunately be unable to take your calls at this time. Sales & support can still be reached at sales@solarbotics.com & support@solarbotics.com, however responses may be a bit delayed.
Turbot Kit!
It's been a while in the making, with a good many prototypes, but finally here it is: The Solarbotics Turbot Kit This alien-like robot is unlike any other robot you've seen!
New Catalog!
8th Edition is online! Get it here, or under the "Resources" tab - it's on the top bar.
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.