..and we are back to (relatively) normal from an exciting and exhausting weekend at the Comic Expo. The update with many pictures coming soon!
MakeFashion Tech Gala Photos
Solar botics
March 31, 2015
Solarbotics just attended the MakeFashion Gala here in Calgary. It was a glowing show of glowing lights and wearable technology. Check out the photos in our Flickr stream.
Photo courtesy George Dimitrov Photography
Among all the other wonderful things we've seen using our string LEDs before, there was nothing quite as intense as these outfits. Olga Sem, Kat Leto and Marina Ortman did an amazing job of incorporating them into the costumes.
Look at this density! Part of the Joker outfit, photo courtesy Kat Leto.
MORE POSTS
Friday New Product: Synapse, OpenBeam an...
Lets contabulate! And that means, as I recently learned, to cover with boards, which in our case are - breadboards. Today's breadboard coverage is only partial, as we have other stuff to show off too: Synapse "Getting Started" Transmitter Bundle $49.99 Add a Wii Nunchuck and battery to this bundle and you'll have a simple […]
New GM11-14 mounting screws
BOY those are strange little screws on the face of the GM11-14 series of gear motors! 1.7mm diameter x 0.35mm thread pitch ain't a common bolt, but we found some 4mm long that we've made available for those of you looking for a precision method of mounting the motors. Check out part M1.7x0.35!
MAKE Magazine, Vol6...
Is on robots! Lots of BEAM Robots! Read More...
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.