At Solarbotics, we've been getting quite a few questions regarding the "real-world" performance of our solarcells. Although we do have the official Panasonic Sunceram datasheets, it is written in a quite technical manner and does not include practical design data.
MakeFashion 2014
Solar botics
March 4, 2014
Just a quick note to say that we have survived MakeFashion, with (hopefully) positive outcomes, and if you haven't attended, the highlights of the show are available on our Flickr photostream.
MORE POSTS
More New Gear Motors
Here they come: The GM11a, GM12a, GM13a, GM14a, and the GM18. These motors are very similar to the GM11/12/13/14 series you know and love, but for less money!
Solarbotics Closed Monday(Thanksgiving)
Yes, we're Canadian, so we celebrate the Thanksgiving weekend a bit earlier than our neighbours to the South. Thus, we won't be in on Monday the 8th. But our website will always be here! Have a good Columbus Day down there!
Project: Experiments in Watermelon Filam...
It takes a while to get to know all the quirks of your 3D printer and filament well. We thought we'd add to the knowledge base and share what we've learned about using the eSun 1.75mm PLA filament in Glass Watermelon Red on our Kossel Pro delta style 3D printer.
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.