Solarbotics Ltd. is now a distributor of Sherline Machine Tool Products , and to inaugurate this arrangement, Solarbotics and Sherline are teaming up to bring a 5400 Mill package to the Western Canadian Robot Games for fundraising! We're providing the WCRG with this excellent high-quality mill ($921 CDN / $650 USD Retail) to use as […]
Make Magazine! Servo Magazine!
Dave Hrynkiw
November 1, 2005
Woot! (Ok, I know it's spelt W007)
The Sumovore is featured in volume 4 of Make Magazine in their suggested shopping list! For those of you who don't know about this killer quarterly publication from the fine folks at O'Reilly & Associates, you have to check it out. Makezine is ideal for all you DIY people out there. (Don't know what DIY means? Do It Yourself!)
Also this month in the mail is the Matrix comparison of the Sumovore, the Mark III and the Parallax Minisumo in this month's Servo Magazine. We hate to brag (wrong - we do!), but the Sumovore practically walks away with the comparison! Again, for those of you unfamiliar with Servo Magazine, it's brought to you by the same fine folk who publish "Nuts and Volts". With a pedigree like that, you know it's a well-presented magazine.
MORE POSTS
Jeff de Boer on CBC Radio
If you came to the BEAM/WCRG Millennium Games in Calgary last summer, you may have seen Jeff de Boer's lecture on the aesthetic component of robotics. Jeff is a local Calgary artist (recently inducted to the Royal Canadian Order - a huge honor, considering his age), and was interviewed on CBC radio Monday with Shelaugh […]
Friday New Product: Grove, Kossel and XB...
Seeed Raspberry Pi Breakout Board v1.0 $14.95 The Raspberry Pi Breakout Board for Raspberry Pi is a prototype board that allows you to combine your Raspberry Pi with other components and modules. Grove - Light Sensor(P) $3.75 Panel mount light sensor from SeeedStudio. XBee WiFi Module - Wire Antenna $52.75 This is the XBee WiFi […]
3D Printed frame for Line Follower
Ohhh, we like 3D printers. We're working with the local Protospace to fund-raise for a Makerbot. I want to see one of these Line Follower chassis (especially as some of the parts look particularly familiar!). LOVE open source hardware!
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.