I wonder what's going to happen if you stuff all the dry beer ingredients in your mouth? Would you turn into a foam spitting monster, a rabid-looking human? Read along, and you'll know what I'm talking about: Glassified: Augmenting a traditional ruler with digital functionality I am past needing this for school, but I sure […]
Los Alamos BEAM Workshop
Dave Hrynkiw
March 19, 2001
We're happy to announce that the 2001 Los Alamos BEAM Robotics Workshop is going ahead this May 3 to 6th! After much delay and threats of budget-cuts, funding has finally been secured. Thanks to Joe Vigal and Paul Argo of the Los Alamos National Laboratories for keeping this great event alive for this final year! It's questionable if the workshop will be resurrected next year, so if you are at all interested in coming out to this great BEAM event, this is most likely your last chance!
This year's event will again be at the Santa Fe Art Institute, in the 4300 square foot indoor studio. This is adjacent to a splendid outdoor courtyard with a large fountain (ideal for testing aquatics...). Santa Fe, New Mexico is a beautiful area, with lots of sunshine and splendid tourist attractions. That bit is for you to convince Mom/Dad/Wife/Husband that there'll be something to do for the non-robogeeks in the family.
We're told that the Santa Fe Art Institute is taking care of registrations, so you may want to contact them at (505) 424-5050 for details. We'll try to get updates as soon as possible.
MORE POSTS
BEP Application: Servocore Walker
The following instructions detail how to build a Servocore walker. A Servocore walker differs from a regular walker by utilizing the internal electronics in unmodified servos, which give position feedback from the motor in the servo. This position feedback allows for very long stride lengths without the use of mechanical stops or springs.
Tom Gray's "SpringTail"
Just tripped over this link on the Yahoogroups BEAM mailing list. Nice looking walker - built using our BEP boards too!
Turbot Winners...
New updateWe've got confirmation from all three Turbot winners! They are: Scott Williams of New Jersey, USA, and... Amin Younes of New York State, USA! Emiel Roumen of the Netherlands! ps: Turbot kit looks like it'll be ready real soon!
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.