Welcome to the new Solarbotics Website! We've been busy whipping Kenny the Web-boy with various types of wet noodles (use Fettuccini - heavier!) to get this new and improved site up to snuff. This year, we've moved the site to 100% ASP (yes, I hear the "boos" from the Linux camp over in Minnesota), which […]
Los Alamos BEAM Workshop
Dave Hrynkiw
March 19, 2001
We're happy to announce that the 2001 Los Alamos BEAM Robotics Workshop is going ahead this May 3 to 6th! After much delay and threats of budget-cuts, funding has finally been secured. Thanks to Joe Vigal and Paul Argo of the Los Alamos National Laboratories for keeping this great event alive for this final year! It's questionable if the workshop will be resurrected next year, so if you are at all interested in coming out to this great BEAM event, this is most likely your last chance!
This year's event will again be at the Santa Fe Art Institute, in the 4300 square foot indoor studio. This is adjacent to a splendid outdoor courtyard with a large fountain (ideal for testing aquatics...). Santa Fe, New Mexico is a beautiful area, with lots of sunshine and splendid tourist attractions. That bit is for you to convince Mom/Dad/Wife/Husband that there'll be something to do for the non-robogeeks in the family.
We're told that the Santa Fe Art Institute is taking care of registrations, so you may want to contact them at (505) 424-5050 for details. We'll try to get updates as soon as possible.
MORE POSTS
2003 LANL Workshop
We've got the official "OK" to open up registration for the 2003 LANL BEAM Workshop in Los Alamos, New Mexico. The 3-day workshop is from May 1-3, with the 1-day following on May 4. Check it out at any of the following links: Direct IP link (until the following DNS entries echo through the web) […]
New Product: Prototyping & Enclosur...
Mega Protoshield for Arduino $20.75 The Arduino Mega has LOTS of I/O. This Mega Protoshield by Adafruit breaks it all out for easy access and prototyping. Single Panel Breadboard with Terminals $13.00 830 contact single panel breadboard with 3 banana terminal jacks. Acrylic Enclosure for the 1018 Interface Kit 8/8/8 $11.50 The 3804 Enclosure is […]
BEP Application: Turbot
The Turbot is a member of the Scophthalmidae family of flatfish and is almost completely circular. Turbot is often found partially buried in the seabed in sand, gravel, rocks and sediment. Its fat content varies, but it usually contains roughly 1 gram of omega-3 fatty acids per 100g fillet. Barring advances in genetic engineering, we will not be building that kind of Turbot. However, this kind of Turbot can be built with a soldering iron.
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.