No more rubber band tires for us! We've invested in getting our very own wheels made for us, with molded-on thermoplastic rubber wheels! These wheels are slightly larger in diameter than the old style, measuring 69.2mm (2.72") diameter and 7.65mm (0.30") wide. Ah, but how good are they? They're definitely better than the old style! […]
Los Alamos BEAM Workshop
Dave Hrynkiw
March 19, 2001
We're happy to announce that the 2001 Los Alamos BEAM Robotics Workshop is going ahead this May 3 to 6th! After much delay and threats of budget-cuts, funding has finally been secured. Thanks to Joe Vigal and Paul Argo of the Los Alamos National Laboratories for keeping this great event alive for this final year! It's questionable if the workshop will be resurrected next year, so if you are at all interested in coming out to this great BEAM event, this is most likely your last chance!
This year's event will again be at the Santa Fe Art Institute, in the 4300 square foot indoor studio. This is adjacent to a splendid outdoor courtyard with a large fountain (ideal for testing aquatics...). Santa Fe, New Mexico is a beautiful area, with lots of sunshine and splendid tourist attractions. That bit is for you to convince Mom/Dad/Wife/Husband that there'll be something to do for the non-robogeeks in the family.
We're told that the Santa Fe Art Institute is taking care of registrations, so you may want to contact them at (505) 424-5050 for details. We'll try to get updates as soon as possible.
MORE POSTS
TechBurlesque Fundraiser on January 17
As a worthy conclusion for the last workweek on Friday night we attended TechBurlesque show, which was a fundraiser for the upcoming 2014 Make Fashion Gala & Fashion Show. It was hosted by Endeavor Arts Gallery located in the downtown Calgary. In preparation to the show we have donated a bunch of electronics and glowy […]
GM4's Back in Stock
We just received a huge order of our GM4 Clear Servos, so they are now available to order again! Read More...
Solarbotics Raspberry Pi 3 SAFE Assembly...
The instructions for assembling the Pi v3 and the previous acrylic Pi SAFE are quite similar. The only difference between the models is the location of the LED light pipes, so these Pi3 instructions apply generally to all Pi SAFE versions. 1. Your Parts! 8 x 4-40 nuts 8 x 4-40 x 3/8" bolts 2 […]
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.